Overview ..................................5 Backside ..................................6 Installation ................................... 6 Set Up and Operation ............................... 7 System Setup Example (8 x Xi-3 and 2 x Xi-12B) ...................... 7 Connection Cables ................................8 Recommended Speaker Cables..........................9 Maintenance ..................................9 Troubleshooting ................................. 9 Product Specifications ..............................
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● 2 x DAP Audio Xi-12B ● User manual Safety Instructions Every person involved with the installation, operation and maintenance of this system has to: ●...
Please turn off the power switch, when changing the power cord or signal cable, or select the input mode switch. ● Prevent distortion! Make sure that all components connected to the Xi-12B have sufficient power ratings. Otherwise distortion will be generated because the components are operated at their limits. ●...
Xi-12B Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK...
Description of the device Features The Xi-12B is a front-loaded 12" vented subwoofer with the extra low grunt, needed for maximizing your sound experience. Combined with the Xi-3 cabinets (D3432/D3433), this little subwoofer will complete the already versatile range for any application.
Fig. 03 Installation Remove all packing materials from the Xi-12B. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing.
Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. System Setup Example (8 x Xi-3 and 2 x Xi-12B) Make your initial connections with all the equipment powered off and ensure that all the main volume controls are turned completely to the minimum.
Xi-12B Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
03) If all of the above appears to be O.K., plug the unit in again. 04) If you are unable to determine the cause of the problem, do not open the Xi-12B, as this may damage the unit and the warranty will become void.