Beko BBVM17400BDS User Manual page 17

Placing the tray on the cooking shelves
It is also crucial to place the trays on the
wire side shelves properly. While placing
the tray on the desired shelf, its side de-
signed for holding must be on the front.
For better cooking, the tray must be se-
cured on the stopping socket on the wire
shelf. It must not pass over the stopping
socket to contact with the rear wall of the
oven.
Stopping function of the wire grill
There is a stopping function to prevent the
wire grill from tipping out of the wire shelf.
With this function, you can easily and
safely take out your food. While removing
the wire grill, you can pull it forward until it
reaches the stopping point. You must pass
over this point to remove it completely.
Tray stopping function
There is also a stopping function to pre-
vent the tray from tipping out of the wire
shelf. While removing the tray, release it
from the rear stopping socket and pull it
towards yourself until it reaches the front
side. You must pass over this stopping
socket to remove it completely.
Proper placement of the wire grill and tray
on the telescopic rails-On models with
wire shelves and telescopic models
Thanks to telescopic rails, trays or the wire
grill can be easily installed and removed.
When using trays and wire grills with the
telescopic rail, care should be taken that
the pins on the front and back of the tele-
scopic rails, rest against the edges of the
grill and the tray (shown in the figure).
EN / 17
EN
PL