Package; Transport Damage; Installing - Viessmann TECTO CI6 PI 45 72 User Manual

PI
NOTE
Storing flammable or hazardous liquids in the cabinet is strictly prohibited.

2.3. Package

Transport or move the cabinet to its destination site in the original factory packing, whenever
possible. The packaging materials are recyclable.
NOTE (This applies to cabinets using R600a as refrigerant): do not turn on the power
to the cabinet if you suspect that a refrigerant leakage has occurred during
transportation.

2.4. Transport damage

Unpack the cabinet and check for any sign of damage during transport. Report any damage
immediately to your insurance company, or to the supplier or manufacturer of the cabinet.

2.5. Installing

1. Set the cabinet in its place.
NOTE
2. Ensure that the airflow to the condenser unit is not
obstructed.
Leave an unobstructed air gap of at least 20 cm behind the
cabinet.
When installing the cabinet, make sure of the following:
• The area where the cabinet is placed is flat and level.
• No objects are placed on top of the cabinet.
• The cabinet is not placed in the immediate vicinity of a heat source
such as a radiator, air blown heater or spotlight.
• The cabinet is not exposed to direct sunlight. If necessary, use blinds in
any nearby window.
• The air conditioning for the premises does not blow onto the cabinet.
The correct positioning of the cabinet optimises temperature conditions and
performance.
Cabinets with castors / wheels may be anchored to the wall behind them as
a safety precaution.
Version 05/2022
Do not lift the cabinet from the top frame, it may
break.
ENGLISH
min 20cm
6