Table of Contents
Advertisement
REAR P A.EL J ACKS
(_) Component: Y-CBCR/Y-PBPR Input 2
Input 2 provides Y-CBCR/Y-PBP Rjacks for connecting equipment with this capability, such as a DVD player.
NOTE:
DO NOT connectstandardVIDEO or S-VIDEO to Input2 whenusingY-CBCR/Y-PBP R input.
When usingthe Y-CBCR/Y-PBPRinputjacks,connectyourcomponents audiooutputto the TV's Input2 Left and RightAudio input
jacks.
Yourcomponent outputsmay be labeledY, B-Y,andCR/PR. In thiscase, connect the components B-Y outputtothe 3_/'s CB/PB input
andthe componentsR-Y outputto the TV's CR/PR input,
It may be necessaryto adjustTINT orturnAUTO COLOR-ONtoobtainoptimum picture quality whenusingthe Y-CBCR/Y-PBP R inputs.
(See pages49 and50)
To ensureno copyright i nfringement, t he MONITOROUT outputwillbe abnormal,whenusingthe Y-CBCR/Y-PBP R jacks.
When usingthe Y-CBCR/Y-PBP R jacks, Input2 will be viewedas a blankPIP sub-picture. (See page 29.)
(_) SUB WOOFER Output
This jack provides variable audio output to a sub-woofer accessory. With this connection, the audio can be controlled by the
television's main volume and also by an independent sub-woofer volume feature found in the THEATER-SUB WOOFER menu.
(_
EXT. DECODER Input
These jacks allow you to input audio from a DVD player or external amplifier with Dolby* Digital The L (left), C (center), and R (right)
audio will be heard from the TV's internal speakers. The LS (left surround) and RS (right surround) can be heard by connecting
speakers to the rear speaker output terminals on the TV. The LFE (low frequency effects) can be heard by connecting a sub woofer
to the sub woofer output terminal on the TV.
"Dolby is a trademark of Dolby Laboratories.
I NOTE:
1)
2)
EXT. DECODER Input will be heard when surround - EXT. DECODER is selected. But this can only be selected
when in Video:2 mode.
Use the EXT. DECODER Input instead of the standard Video:2 audio IJR input if your device has Dolby Digital
Surround output.
12
Advertisement
Table of Contents
