Toyostove Laser 56 Type I Installation And Operation Instructions Manual page 13

1. Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2. Clean Circulation Fan Cover (ONCE A WEEK)
Remove any dust or pet hair from the fan cover on the back of the heater.
3. Check for Fuel Leaks (REGULARLY)
Make it a habit to check for any sign of kerosene leakage along the fuel line
and at all joints. Kerosene leaks may lead to risk of fire.
4. Check Flue Pipe Area (ONCE A WEEK)
Check the flue pipe joint to make sure connection is firm. Use a vacuum
cleaner to remove any dust or pet hair.
5. Clean Fuel Strainer (ONCE A MONTH)
The strainer of the fuel sump should be cleaned once a month and before
storing heater at the end of each season.
(a) Close the valve(s) of the separate fuel tank.
(b) To catch the fuel which will drain out, set the oil catch below the strainer
cover, with a small container under it.
(c) Loosen the two screws from the strainer cover and remove.
(d) Remove the strainer and wash with kerosene.
(e) Return the strainer to its original position. Replace strainer cover and
screw to secure.
(f) Wipe away any spilled kerosene.
(g) Open the valve(s) of separate kerosene tank. Check for fuel leakage.
(h) Turn the knob of the fusible link valve counterclockwise to open. Check
for kerosene leakage.
Note: At the end of each season unscrew the drain screw to remove all the
remaining kerosene from the fuel sump.
Be sure to follow the A, B and C procedure listed above.
Check
Fuel Sump
Strainer
Cover
Oil Catch
Drain
Screw
Fuel strainer
13