Table of Contents
Advertisement
72
Troubleshooting
ORegarding battery pack
Reference
The player cannot be | elf the battery pack overheats, its protective cir-
operated using the
cuit may be activated, making it no longer possi-
O Playback or other operation is impossible.
Reference
battery pack.
ble to use the battery pack.
No menu play of
eThis function works only with Video CDs with
Video CD.
playback control.
10
15
28
22
22
23
23
23
19
No key operation (by
the player and/or the
remote control unit)
is effective.
e Some operations may be prohibited by the disc.
eThe
HOLD
switch
on
the player's
right-side
panel is set to the "HOLD" position. Turn off the
HOLD function.
ePress and hold STOP (O) to set the player to the
standby
mode
and
then
back
to
ON.
Alternatively, press and hold STOP
(O) to set
the player to the standby mode, disconnect the
AC adaptor, and then re-connect it. (The player
may not be operating properly due to lightning,
static electricity or some other external factor.)
eCondensation
has
formed: wait
about
1
to
2 hours to allow the player to dry out.
eThis player cannot play disc other than DVD,
Video CD and CD.
eThe disc may be dirty and may require cleaning.
eEnsure that the disc is installed with the label
side to be played facing upwards.
®Play fails to start
even when PLAY
(>) is pressed.
ePlay starts but then
stops immediately.
No operations can be
performed with the
remote control unit.
eCheck if the button-type battery is installed with
the correct polarities (® and O).
eThe button-type battery is depleted: replace it
with a new one.
@Point the remote control unit at the remote con-
trol signal sensor and operate.
eQOperate the remote control unit at a distance of
not more than 23 feet (7 meters) from the re-
mote control signal sensor.
eRemove the obstacles between the remote con-
trol unit and remote control signal sensor.
eThe
HOLD
switch
on
the players
right-side
panel is set to the "HOLD" position. Turn off the
HOLD function.
Advertisement
Table of Contents
