Panasonic PalmTheater DVD-L50D Operating Instructions Manual page 24

24
Powering the player using the AC adaptor
Connect the AC adaptor to
the player.
Connect the AC cord to the
AC adaptor.
3 Connect the plug of the AC
cord to AC outlet.
[The player is set to
the standby mode and
the STANDBY (W) in-
dicator lights in red.]
AC adaptor
(supplied)
nx
AC cord
(supplied)
To AC outlet
(AC 120 V, 60 Hz
in U.S.A. and Canada)
(Refer to "IMPORTANT
SAFETY INSTRUCTIONS"
on page 4.)
Standby mode:
This refers to a condition in which the AC adaptor is connected to the AC outlet and the
player is consuming a small amount of power (approx. 2.0 W).