Table of Contents
Advertisement
O
a a
ae
ar,
4 Tilt the joystick (A, V) to select the preferred setting and press
SELECT.
D When "1 LPCM 96k—-48k" is selected
1 No (Factory preset):
e Digital audio of 48 kHz/16 bit is output during playback of the DVD recorded in
Linear PCM of 48 kHz.
®No digital audio is output during playback of the DVD recorded in Linear PCM of
96 kHz.
However, audio will be output using the original audio recording system in case
of the DVD which has not been copyright-protected.
Yes:
During playback of the DVD recorded in Linear PCM of 48 kHz or 96 kHz, digital
audio converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright
protection.)
D When "2 Dolby Digital" is selected
1 Bitstream (Factory preset):
Dolby Digital (AC-3) bitstream (1ch-5.1ch) is output during playback of the DVD
recorded in the Dolby Digital (AC-3).
Select this setting when the player is connected to the Dolby digital (AC-3) de-
coder.
PCM:
Digital audio converted to PCM (2ch) of 48 kH2/16 bit is output during playback of
the DVD recorded in the Dolby Digital (AC-3).
D When "3 dts" is selected
1 Off (Factory preset):
No digital audio is output during playback of the DVD recorded in dts.
2 Bitstream:
dts bitstream is output during playback of the DVD recorded in dts. Select this set-
ting when the player is connected to the dts decoder.
Setting is finished and the screen illustrated in step 3 is displayed.
For your reference:
O To return to the previous
eSee page 62 for the recommended set-
menu
ting of "6 Digital Audio Output'.
Press RETURN.
eln the case
of the remote
control, the
items can be selected using the cursor
buttons instead of the joystick.
O To finish the initial settings
Press
MENU
at the
initial
settings
screen illustrated in step 1 on page 51.
(In the case of the remote control, press
ACTION or MENU.)
Ror
Tar
Gie
61
Advertisement
Table of Contents
