Advertisement
3. DISASSEMBLY
3.1 PANEL AND BASE
In removing the panel, follow the below listed
steps in the order given.
Using any unnecessary
force will result in bending the springs or damaging
other parts.
Panel removal steps
1. Remove
the headshell
and weight
assembly,
and the weight shaft assembly.
The
weight
shaft
assembly
is removed
by
loosening
screw
(Hexagone
socket
screw)
and the headshell by loosening screw @.
2. Lift off the turntable platter.
Turntable
platter
oe
;
Pane!
Motor assembly;
CO
~1
OS
Dust cov
Y
er
. Loosen
insulator
attachment
screws
@ and
remove the insulator.
(Do not mix the color-
coded
float springs.
They must be replaced
with their original insulators during reassemb-
ly.)
. Remove
the rear panel PU cord strain relief.
. Lift the front section of the panel (operating
controls) very slightly
. Unplug the 2p connector.
. Completely remove the PU cord fromthe panel.
. Taking
care
not
to
damage
the
tonearm,
remove it from the panel.
(Hold the tonearm
steady.)
Weight assembly
®
Screw.
a
Rubber bush
oa
Weight shaft assembly
we
Control mechanism
Fig. 3-1 Disassembly
Advertisement
