How To Use Aux Mode - Fiat 124 SPIDER 2020 Manual

30 AUX/USB/IPOD® MODE
Connecting With A Connector Lead
Proceed as follows:
1. If there is a cover on the AUX jack or USB port, remove
the cover.
2. Connect the device plug/connector lead to the auxiliary
jack.
NOTE:
• Do not place objects or apply force to the auxiliary
jack/USB port with the plug connected.
• Insert the plug into the auxiliary jack/USB port securely.
• Insert or pull out the plug with the plug perpendicular to
the auxiliary jack/USB port hole.
• Insert or remove the plug by holding its base.

HOW TO USE AUX MODE

Proceed as follows:
1. Switch the ignition to ACC or ON/OFF.
2. Push the power/volume dial to turn the audio system on.
3. Push the MEDIA button of the audio unit to change to the
AUX mode.
NOTE:
• When the device is not connected to the auxiliary jack, the
mode does not switch to the AUX mode.
• Adjust the audio volume using the portable audio device
or audio unit.
• Audio adjustments other than audio volume can only be
done using the portable audio device.
• If the connection plug is pulled out from the auxiliary jack
while in AUX mode, noise may occur.