Panasonic VDR-D100EB Service Manual page 97

4. Removal of Rear Case & EVF Ass'y
1) Disconnect the EVF F.P.C. and the Connector Cable
from Connector FP5 and P1.
2) Remove the 6 Screws (519).
519
5. Installation of Lens Ass'y
Take care not to damage the motor leads.
1) Install the Lens Ass'y with the 2 holes and 2 Screws
(519).
2) Connect the F.P.C.s to Connector FP301, FP701.
hole
FP701 FP301
P1
FP5
519
519
519
519
519
Fig. D4
519
Lens Ass'y
Motor leads
519
hole
Fig. D5
6. Removal of Main P.C.B. and Jack P.C.B.
1) Remove the 6 Screws (419, 519).
2) Disconnect the Zoom Switch F.P.C. from Connector
FP3.
3) Remove the Main P.C.B. and Jack P.C.B. to disconnect
Connector B1 (B to B Connector).
Main P.C.B.
& Jack P.C.B.
519
519
B1
519
7. Removal of Disc Cover Lock Unit
1) Remove the 3 Screws (419, 533, 544)
2) Slide the Lock Lever to open the Disc Cover.
3) Disconnect the F.P.C. from Connector on the DVD
Drive Frame Unit.
4) Remove the Disc Cover Lock Unit. Take care not to
damage the 2 Switches.
Disc Cover Lock Unit
Lock Lever
Slide
419
419
FP3
519
Fig. D6
544
Switch
Connector
Fig. D7
519
533
Switch