Table of Contents
Advertisement
1. Safety Summary
Installation and Maintenance Manual
1. Safety Summary
WARNING
!
•
Do not conduct installation works such as connections of refrigerant piping, drain pipes and wiring
before reading the installation manual.
•
Ensure that the grounding wires are connected properly and firmly.
NOTICE
•
Do not install the indoor unit, outdoor unit, wired remote controller and cable within 3 meters distance
from any strong electromagnetic radiation sources like medical devices.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•
Means for disconnection from the supply mains, which have a contact separation in all poles that
provide full disconnection under overvoltage category III conditions, must be incorporated in the fixed
wiring in accordance with AS/NZS 3000.
•
The appliance shall be installed in accordance with relevant local and national wiring regulations.
2. Tools and Instruments Necessary for the Installation
No.
Tool
1
Screwdriver
2
Vacuum pump
3
Charging hose
4
Megohmmeter
5
Copper Pipe Bender
6
Adjustable wrench
NOTE:
•
In case of direct contact with refrigerant, please use installation tools and instruments dedicated to
the new refrigerant.
DANGER
!
•
Moisture, oxide, grease, and other foreign particles can easily affect the performance of the system.
Hence, it is necessary to remove the moisture, dust, other refrigerant or refrigerant oil from the
refrigeration system.
•
Failure in not in using the specified materials and tools may lead to explosion, personal injury,
refrigerant leakage, electrical failure or fire.
3. Transportation and Handling
3.1 Transportation
Before opening the package, transport the indoor unit as close to the installation location as possible.
WARNING
!
•
The maximum number of pieces of equipment or the configuration of the equipment permitted to be
transported together will be determined by the applicable local transport regulations.
No.
Tool
7
Pipe cutter
8
Brazing tools
9
Hexagon wrench
10
Charging Cylinder
11
Spanner
12
Weigher
-4-
No.
Tool
13
Cutter for Wires
14
Gas Leak Detector
15
Leveler
16
Clamper for Solderless Terminals
17
Hoist (for Indoor Unit)
18
Ammeter
Advertisement
Table of Contents
