Sapphire Pure Element PE-AM2RS485M Manual page 43

43
ATI Azalia AUDIO (Auto)
This option allows you to control the onboard Azalia (High Definition) audio.
Disable this option if you do not need the high definition onboard sound.
ATI SATA Controller (Both)
This option allows you to enable or disable the Serial ATA controller.
ATI SATA Type (RAID Controller)
This option allows you to control the Serial ATA controller as IDE mode or RAID
mode.
Press <Esc> to return to the Standard CMOS Features Page
Init Display First (PCIEx)
Use this option to specify whether your graphics adapter is installed in one of
the PCI Express or PCI slots.
OnChip USB Controller (Enabled)
This option allows you to enable or disable the onboard USB controller.
OnChip USB KBC Controller (Enabled)
This option allows you to enable or disable the USB Keyboard support.
USB Mouse Support (Enabled)
This option allows you to enable or disable the USB mouse support.
IDE HDD Block Mode (Enabled)
Block mode is also called block transfer or multiple sector read/write. If your
IDE hard drive supports block mode, select Enabled for automatic detection of
the optimal number of block read/write per sector the drive can support.
Onboard FDC Controller (Enabled)
Select Enabled if your system has a floppy drive controller (FDC) installing in
the system board and you want to use it. If you install add-in FDC or the system
has no floppy drive, select Disabled.
Onboard Serial Port 1/2 (Auto)
Select a logical COM port name and matching address for the first and second
serial ports. Select an address and corresponding interrupt for the first and
second serial ports.
Onboard Parallel Port (378/IRQ7)
This option allows you to determine onboard parallel port controller I/O
address setting.
SAPPHIRE PURE ELEMENT