Using Easy.q Mode (For Beginners) - Samsung SC-D351 Owner's Instruction Book

[ ENGLISH ]
Basic Recording
+ The EASY.Q mode works only in Camera mode.
+ The EASY.Q mode allows a beginner to easily make good recordings.
t. Set the Power switchto CAMERA. - , /
2set the Mode switch to TAPE SC-D3 3,O354,D3 5 on,y
3. By pressing the EASY.Q button, all functions on the Camcorder will be set to off and the recording | _ I [_-",_ /_'x_:.d'q
settings will be set to the following basic modes:
[] Battery level, recording mode, counter, date/time, and DIS (_y) will be displayed.
[] The word EASY.Q will appear on the LCD screen at the same time.
However, the Date/Time will only be seen if it has been previously set. (see page 33)
4. Press the Start!Stop button to start recording.
Recording wilt begin using the basic automatic settings.
5. Press the EASY.Q button again in the STBY mode and then turn the EASYtQ mode off.
[] The EASYQ function will not turn off while you are recording.
[] The camcorder witl return to the settings that were set prior to activating EASY.Q mode.
[ Notes ]
[] in EASY.Q mode, certain functions are not available, such as Menu, BLC, Manual focus.
tf you want to use these functions, you must first turn the EASY.Q mode off.
[] The EASY.Q mode settings are deleted when the Battery pack is removed from the Camcorder and
must be reset when the Battery pack is replaced.
[] EASY.Q mode wil! not turn off during a recording.
[] Taking a photo image using the PHOTO button white EASY.Q is set reIeases DIS function.
[] Digital Zoom, COLOR NITE SHUTTER or Digital Effect is not available in the EASY.Q mode.
f_ _
STBY []
000:10
£ASYQ _
00ran
\