Chevrolet Malibu 2024 Owner's Manual page 137

136 Infotainment System
Similar limits exist for album content.
If there are more than 12,000 albums, but
fewer than 24,000, the content cannot be
accessed directly with one command like,
Play <album name>. The command Play
Album must first be spoken; the system
will then ask for the album name. The reply
would be to say the name of the album
to play.
Once the number of files has exceeded
approximately 24,000, there is no support
for accessing the songs directly through
voice commands. There will still be access to
the media content by using commands for
playlists, artists, and genres.
The access commands for playlists, artists,
and genres are prohibited after the number
of this type of media exceeds 12,000.
The system will provide feedback the first
time voice recognition is initiated if it has
become apparent that any of these limits
are reached during a device initializing
process.
Voice recognition performance will degrade
to some extent based on many factors when
adding large amounts of data to recognize.
If this is the case, perhaps accessing songs
through playlists or artist name would work
better.
Voice Recognition for Navigation (If
Equipped)
Navigation : Begin a dialog to enter
specific destination information.
Navigation Commands : Begin a dialog to
enter specific destination information.
Address : Begin a dialog to enter a
specific destination address, which includes
the entire address consisting of the house
number, street name, city, state/province,
and country. Do not include the ZIP code.
Place of Interest : Begin a dialog to enter
a destination Place of Interest category or
major brand name.
The name must be precisely spoken.
Nicknames or short names for the
businesses will not likely be found. Lesser
known businesses might have to be located
by category, such as fast food, hotels,
or banks.
Navigate to Contact : Begin a dialog to
enter a specific destination contact name.
Cancel Route : End route guidance.
Take Me Home : Create a route to a
stored home location.
Voice Recognition for the Phone
Call <contact name> : Initiate a call to a
stored contact. The command may include
location if the contact has location numbers
stored.
Call <contact> At Home, At Work,
Mobile, or On Other : Initiate a call to a
stored contact and location at home, at
work, on mobile device, or on another
phone.
Call <cell phone number> : Initiate a call
to a cell phone number of seven digits, 10
digits, or three digit emergency numbers.
Pair Phone : Begin the Bluetooth pairing
process. Follow the instructions on the
infotainment display.
Redial : Initiate a call to the last dialed
number.
Switch Phone : Select a different
connected cell phone for outgoing calls.
Voice Keypad : Begin a dialog to enter
special numbers like international numbers.
The numbers can be entered in groups of
digits with each group of digits being
repeated back by the system. If the group
of digits is not correct, the command
Delete will remove the last group of digits
On