Akw Navlin 23548 Installation Instructions

Corner wash basin

Advertisement

Navlin Corner
Wash Basin
INSTALLATION INSTRUCTIONS
Stock code
23548
Installation must be carried out in accordance with these instructions, and must be conducted by a
qualified and competent installer.

Important

This product must be installed in compliance with Water Regulations.
Access must be made available to the water supplies and fixings for future maintenance and servicing. Make
sure all fixing holes are used and do not over-tighten the fixings. Before fixing any unit to the walls, ensure that
the construction of that wall type is capable of the maximum weight of the loaded unit and the appropriate
fixings and fixtures are used for that wall type.

Before you start

Please remove any protective covering and examine carefully. Check that all items are present before
discarding of all packaging. Please notify the retailer immediately of any damage or faults. The manufacturer
cannot be held responsible for any installation costs that may arise from damaged or faulty products being
installed and not in accordance with these instructions.
Keep small parts and packaging away from children and dispose all packaging in accordance with the local
recycling authorities.

Safety

– Handle ceramics with extreme care.
– This product is heavy and may require two people to carry.
– Have the correct tools available.
– When drilling walls or floors, check first for hidden pipes and cables.
– Use safety eye wear when drilling.
Order: 01905 823 299
|
orders.akw-ltd.co.uk
Technical Support: 01905 560 219
|
Tech@akw-ltd.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Navlin 23548 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Akw Navlin 23548

  • Page 1 – This product is heavy and may require two people to carry. – Have the correct tools available. – When drilling walls or floors, check first for hidden pipes and cables. – Use safety eye wear when drilling. Order: 01905 823 299 orders.akw-ltd.co.uk Technical Support: 01905 560 219 Tech@akw-ltd.co.uk...
  • Page 2 Apply Fit the tap and waste pipe in accordance with sealant around the washbasin and wall. the manufacturer’s instructions. General: 01905 823 298 www.akw-ltd.co.uk...
  • Page 3 Due to the very wide variability of possible installation conditions, AKW cannot provide all circumstances for the installation. AKW cannot accept any liability in connection with this information or its use. This information is provided on the condition that the person receiving it shall make his/her own tests to determine the suitability for the particular purpose.
  • Page 4 Follow us on Social: unresolved, contact AKW Technical enquiries who will provide further advice and arrange for a maintenance engineer to visit if necessary. none of the foregoing affects your statutory rights.

Table of Contents