Storage - flowair AURA HCS Series Installation And Operating Instruction

Table of Contents

Advertisement

2.3. Storage

If the device is to be stored before installation, several rules for protection against damage must be observed. Storage
temperature conditions should be in the range of -25°C to +45°C at a maximum relative humidity of 95%. At high
temperatures (above 50°C) refrigerant may leak through the safety valves.
Before storing in winter, when temperatures may drop below 0°C, check that there is no water in the hydraulic circuit
and loosen the drain valves and plugs. Parts of the hydraulic circuit and subsequently the cooling circuit could be
Short-term storage - within 2 months of delivery
1. Do not remove protective elements and foils
2. Protect the device from external damage - mechanical, thermal, open flame, damage by animals (e.g. rodents)
3. Protect the device from dust (e.g. from construction work)
Long-term storage - more than 2 months from delivery
1. Do not remove the protective elements, but replace the foil with another solid material - a tarpaulin
2. Protect the device from external damage - mechanical, thermal, open flame, damage by animals (e.g. rodents)
3. Protect the device from dust (e.g. from construction work)
4. Check that there is no water in the hydraulic section (see previous NOTICE)
If the storage period exceeds 10 months, it is necessary to perform a complete inspection of the equipment by an
damaged by freezing the water.
authorized FLOWAIR partner before proceeding with the installation.
! NOTICE !
INFORMATION
FLOWAIR sp. z o.o. / OMSAC210708EN
9

Advertisement

Table of Contents
loading

Table of Contents