Advertisement
Open the black connector and
Insert the pink cable pin (speedpulse)
slide the cables out
to the open position twenty-two (22)
! Steps 25 & 26 are only for AVIC-Z1000D12-C & AVIC-Z1000D11-CHU kits !
Connect the main harness
DO NOT USE THE ORANGE CONNECTOR
Make sure to use the GREY connector
See the warning label on the interface
!Use top plug for steering wheel controls (W/R)!
! Step 27 is only for AVIC-Z100016-C !
Connect battery and accessory power to the
Put the cable for the rotary commander
main harness of the unit
through the side opening of the panel
Pioneer installation manual - Fiat Ducato 8 - v1.03
Advertisement
