1. Manuals
  2. Brands
  3. Vag Manuals
  4. Control Unit
  5. GA 942SS
  6. Installation, operation and maintenance manual

Vag GA 942SS Installation, Operation And Maintenance Manual

2”x1”, 2” and 3” x 2” drawing ecav-7104 durovent combination air valves for sewage & wastewater
Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION, OPERATION AND
MAINTENANCE MANUAL
FIGURE 942SS
2"x1", 2" and 3" x 2" Drawing ECAV-7104
Durovent™ COMBINATION AIR VALVES
FOR SEWAGE & WASTEWATER

TABLE OF CONTENTS

Introduction .................................. 2
................. 2
Receiving & Storage ....................... 2
Installation ..................................... 2
Valve Construction ......................... 3
Preventive Maintenance .................. 3
Trouble Shooting ........................... 3
Disassembly ..................................3, 4
Reassembly ................................... 4
............... 4
Figure 942SS Drawing/Parts List........... 5
5
Repair Kits .................................... 5
Warranty ....................................... 5
234 Clay Avenue • Mars, PA 16046 USA
Telephone (724) 776-1020 • Fax (724) 776-1254
E-mail:
info-ga@vag-group.com
Manual Number 942SS-IOM-111320

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GA 942SS and is the answer not in the manual?

Questions and answers

Related Manuals for Vag GA 942SS

Summary of Contents for Vag GA 942SS

  • Page 1: Table Of Contents

    Backflushing Instructions Figure 942SS Drawing/Parts List…….…. 5 How to Order Replacement Parts ..….. Repair Kits ……………………………… 5 Warranty .……………………………….. 5 234 Clay Avenue • Mars, PA 16046 USA Telephone (724) 776-1020 • Fax (724) 776-1254 E-mail: info-ga@vag-group.com Manual Number 942SS-IOM-111320...

  • Page 2: Introduction

    INSTALLATION, OPERATION and MAINTENANCE Figure 942SS Combination Air Valves INTRODUCTION the water level rises lifting the float and re- This manual will provide the information to closing the small orifice. This sequence occurs properly install, operate and maintain the valve as often as necessary to release air and gas that to ensure a long service life.

  • Page 3: Valve Construction

    valve using wrench flats. DO NOT OVER- grease and require periodic cleaning. TIGHTEN. facilitate such cleaning GA Industries air valves with an “F” at the end of the Figure Number (e.g., 942F) were supplied with “backflushing Flat-faced flanged valves should be mated with flat-faced flanges and full-face gaskets.

  • Page 4: Reassembly

    Disassemble the valve only as far as needed to Install hex nut (20) and lock washer (24) onto replace damaged or worn parts. end of float rod (10). Apply Loctite 263 to the threads on the float rod (10) and screw float ball First ensure there is no pressure within the (12) onto float rod (10).

  • Page 5: How To Order Replacement Parts

    REPLACEMENT PARTS REPAIR KITS Genuine replacement parts are available from Soft Goods Kit A942-2 (Part Number 2-80- your local VAG/GA Industries representative or 11000-024) includes Items 8, 14, 15, 16, 22 & from the factory: VAG USA, LLC Linkage Kit AL942-2 (Part Number 2-80-11000-...

Table of Contents