INSTALLATION, OPERATION and MAINTENANCE 42”-60” Figure 250-DOC Oil-Cushioned Lever & Weight Swing Check INTRODUCTION This manual will provide the information to properly Prior to installation ensure all debris, packing material install, operate and maintain the valve to ensure a or other foreign material has been removed from both long service life.
VALVE CONSTRUCTION for cushioning. This may occur when a VFD ramps The standard Figure 250-DOC Swing Check Valve down or the pump/motor has high inertia with a has a cast iron or ductile iron body, bolted steel cover, prolonged coast down. stainless steel body seat, stainless steel hinge shaft and cast iron disc with a rubber disc seat.
Genuine replacement parts are available from your (12), remove the gib head keys (49) and pull local VAG/GA Industries representative or from the the shaft (11) out of the valve. It may be factory:...
Page 5
Part No. Part Name Std. Material Part No. Part Name Std. Material Body Ductile Iron Disc Guide Screws Zinc Plated Steel Body Seat 316SS** Disc Arm Cotter Pin Stainless Steel Disc Ductile Iron Disc Arm Washer Stainless Steel Disc Clevis Pin 303SS Shock Absorber EGD SS22-41...