Advertisement
PREPARATION BEFORE USE
2
Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
3
AIR FLOW DIRECTION
Press
: Move the louver in the
1
desired vertical direction.
Press
: Swing the air
2
automatically and press again to stop.
3
For horizontal direction, adjust manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
4
REMOTE CONTROL
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 Off timer button (OFF)
9 High power button (Hi-POWER)
! Economy button (ECO)
" Clear button (CLEAR)
# Check button (CHECK)
AUTOMATIC OPERATION
5
To automatically select cooling or fan only operation
1. Press
: Select A.
2. Press
: Set the desired temperature.
3. Press
: Select AUTO, LOW , LOW+
HIGH
.
6
COOLING / FAN ONLY OPERATION
1. Press
: Select Cool
2. Press
: Set the desired temperature.
Cooling: Min. 17°C, Fan Only: No temperature indication
3. Press
: Select AUTO, LOW , LOW+
or HIGH
.
1110655123_EN-TH.indb 2
1
3
2
7
9
8
#
, MED
, MED+
or Fan only
.
, MED
, MED+
www.ttair.co.th | Tel : 02-385-0728 | E-mail : sales@ttair.co.th | LINE ID : @ttair
DRY OPERATION
7
For dehumidifi cation, a moderate cooling performance is controlled automatically.
1. Press
: Select Dry
2. Press
: Set the desired temperature.
Hi-POWER OPERATION
8
To automatically control room temperature and airfl ow for faster cooling operation
(except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
9
ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
:
Press
Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase).
10
TEMPORARY OPERATION
In case of the misplaced or discharged
remote control
• Pressing the RESET button, the
unit can start or stop without using
the remote control.
• Operation mode is set on
AUTOMATIC operation, preset
temperature is 24°C and fan
operation is automatic speed.
11
TIMER OPERATION
Set the timer when the air conditioner is operating.
1
Press
for enter OFF timer setting.
2
Press
for select desired OFF timer. (0.5 - 12 hrs)
Press
for set OFF timer.
3
4
Press
again for cancel OFF timer.
4
6
12
AUTO RESTART OPERATION
5
!
To automatically restart the air conditioner after the power failure (Power of the
"
unit must be on.)
Setting
1. Press and hold the RESET button on the indoor unit for 3 seconds to set
the operation. (3 beep sound and OPERATION lamp blink 5 time/sec for
5 seconds)
2. Press and hold the RESET button on the indoor unit for 3 seconds to cancel
the operation. (3 beep sound but OPERATION lamp does not blink)
• In case of ON timer or OFF timer are set, AUTO RESTART OPERATION
does not activate.
13
MAINTENANCE
, or
Firstly, turn off the circuit breaker.
Indoor Unit and Remote Control
• Clean the indoor unit and the remote control with a wet cloth when needed.
• No benzine, thinner, polishing powder or chemically-treated duster.
,
.
Setting the OFF timer
EN
ES
FR
IT
DE
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI
3/20/14 3:47 PM
Advertisement
