Electrolux EW7F3816AB User Manual page 27

26 www.electrolux.com
9.8 Deactivating the AutoDose
If you prefer to use the compartments for
manual filling as default choice, you can
deactivated the AutoDose tanks
completely.
Once you have entered the AutoDose
configuration mode by pressing
Température and the Essorage buttons:
1. Tap on the Detergent
the Softener
shows
excluded completely for related tank
or both.
2. After about 10 seconds the display
returns to the programme information
screen.
9.9 Manual filling the detergent
and additives
You may need to use a different
detergent or fabric softener than the
ones used in the AutoDose tanks. First,
make sure that the AutoDose tanks are
disabled and then pour the detergent
and/or other treatments in the manual
compartments.
Do not exceed the maximum
indicated level (
1. Open the detergent dispenser.
button or
button until display
: the AutoDose is
).
2. Put the powder detergent in the
compartment
detergent, refer to "Manual filling the
liquid detergent".
3. If desired, pour the fabric softener in
the compartment
4. Gently close the detergent dispenser,
till click engagement.
. When using liquid
.
Manual