Electrolux EW7F3816AB User Manual page 16

Température
3
touch button
Display
4
AutoDose
Fabric Soften‐
5
er touch but‐
ton
AutoDose Liq‐
6
uid Detergent
touch button
Départ/Pause
7
touch button
Remote start/
8
Départ Différé
touch button
When you select a washing programme, the appliance auto‐
matically proposes a default temperature.
Touch this button repeatedly until the desired temperature val‐
ue appears on the display.
When the display shows the indicators
not heat the water.
It provides information about the setting programme. Refer to
"Display" paragraph for more details.
For activating and deactivating the automatic fabric softener
loading. Refer to "The AutoDose Technology (Autodosing)"
chapter for more details.
For activating and deactivating the automatic detergent load‐
ing. Refer to "The AutoDose Technology (Autodosing)" chap‐
ter for more details.
Touch this button to start, pause the appliance or interrupt a
running programme.
Press this button repeatedly to activate one of the two options
or both.
The relevant indicator comes on in the display.
• Remote start
Select this option to connect appliance with App.
Touch this button, the display shows the indicator
blinking for a few seconds.
After touching the Départ/Pause
shows the indicator
When touching the Départ/Pause
after the indicator
Remote Start is not activated, but the set pro‐
gramme starts.
• Départ Différé
With this option you can delay the start of a programme in
a more convenient time.
Touch the button repeatedly to set the required delay. The
time increases by steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Départ/Pause
shows the indicator
appliance begins the countdown.
, the appliance does
button, the display
and the Remote start is confirmed.
button
stops blinking, the
button, the display
and the selected delay time and the
ENGLISH 15