Setting The Dial Mode - Toshiba FT-8901A Owner's Manual

INSTALLATION
Before using the handset, make sure to read the following instructions.
(TONE MODE)

SETTING THE DIAL MODE

Most phone systems use tone dialing. But, to use tone dialing, you must
have a tone service dialing system supplied by your telephone company.
Then you must set your telephone dial mode for the type of service you
have. If you are not sure which type of service you have, do the following
steps.
1
With the phone in the Standby mode, press and hold
you hear a confirmation tone.
2
Press
TONE/
You hear a confirmation tone.
3
Press and listen for a dial tone.
TALK
4
Press any number other than 0.
If the dial tone sounds, you have tone service and your setting is
complete. If the dial tone continues, you have pulse service and
you must perform steps 5 and 6 below.
5
With the phone in the Standby mode, press and hold
you hear a confirmation tone.
6
Press and hear a confirmation tone. Your setting is complete
for pulse service.
14
TALK
TONE/
.
FLASH
(PULSE MODE)
FLASH
FLASH
until
until