Redial; Out Of Range; Call Waiting; Handset Earpiece Volume Setting - Toshiba FT-8901A Owner's Manual

900mhz cordless telephone digital answering system
Hide thumbs Also See for FT-8901A:
Table of Contents

Advertisement

BASIC OPERATION

REDIAL

Handset On The Base
1) Pick up the handset and press
2) Listen for the dial tone.
3) Press
.
RDL/P

OUT OF RANGE

During a call, as you begin to move too far from the base unit, the
noise increases. Then, you should move closer to the base unit. If
you travel out-of-range, your call terminates.(See page 17
"Interference or static")

CALL WAITING

To use this feature, you must subscribe to the Call Waiting Service.
1
When you hear a call-waiting tone during your conversation on the
phone, simply press
2
To return to the first caller, press
NOTE:
Pressing
FLASH
current caller.

HANDSET EARPIECE VOLUME SETTING

To adjust the earpiece volume, press

HANDSET RINGER VOLUME SETTING

To adjust the ringer volume, press
NOTE:
When the handset is on the base, the handset ringer volume is disabled .
16
TALK
.
.
FLASH
without receiving a Call Waiting signal may disconnect the
Handset Off The Base
TALK
1) Press
.
2) Listen for the dial tone.
3) Press
.
RDL/P
again.
FLASH
during a call.
VOL/RING
during standby mode.
VOL/RING

Advertisement

Table of Contents
loading

Table of Contents