Coffee system
care
Resetting
the brew unit's
basic
position:
[] Press on the latch, '_, and press the
funnel down, ,'_.
[] Push the connection
_iece to the far
left, '_.
[] Press "PRESS" once.
Change
the gaskets
_ __i_ i _i_ __!',_!i!iii!iii_iiii_!_ii_
_ _ii
[] If a leak occurs change the gaskets.
Three gaskets are enclosed with the
machine. One gasket is located
between the steam valve and the
sleeve. The other two gaskets are
located behind the brew unit at the
water feed tube.
The basic position shown above is
reset and the brew unit can be set back
into the machine.
42