Download Print this page

Advertisement

Quick Links

Can-Am Outlander Floorboards
Short Edition
Installation Manual
© 2023 RJWC Powersports EU
www.RJWCPOWERSPORTS.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Can-Am Outlander Floorboards Short Edition and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RJWC Can-Am Outlander Floorboards Short Edition

  • Page 1 Can-Am Outlander Floorboards Short Edition Installation Manual © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com...
  • Page 2 Read carefully before installation! Panel 4R Before starting installation, make sure your ATV is off, and has cooled down. To start the installation of the RJWC Floorboards you will need to remove the stock floorboards. Footgrip When unboxing the Floorboards, you will notice that each panel has a number, followed by either an ‘L’...
  • Page 3 - Assemble the three panels as shown in the image - Premount the Bracket BRKT FR onto the rear of Panel 1R - A Pink Dot incidates where to use a M6x16 screw and © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com...
  • Page 4 - The Screw and Nut are used where the Pink Circle is in the image just in the back assembly - Secure to the plastic against the Panel with a M6x16 Flange Screw and Nut. © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 5 RJWC Logoplate. - Use a M6x30 Screw for the 9mm Distance Shims - Use a M6x40 Screw for the 22mm Distance Shims © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 6 Panel 3L - There are some additional brackets you will need to install which are shown in the next steps Panel 1L BRKT F RUBBER L Panel 2L © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 7 Don’t overtighten the screw which can cause the plastic to become damaged. - Align the Panel with the plastic fascia and push gently into place. © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 8 1L at the bottom with a M6x16 screw and nut. You then want to secure this in place with a M6x16 screw and nut. © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 9 We recommend double checking and retightening all Screws and Nuts before and Need help? Got a question? Or just want to tell us about your day? support@rjwc.se Get in touch at: © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...