Download Print this page

RJWC Can-Am Outlander Floorboards Long Edition Installation Manual

Advertisement

Quick Links

Can-Am Outlander Floorboards
Long Edition
Installation Manual
© 2023 RJWC Powersports EU
www.RJWCPOWERSPORTS.com
www.RJWCPOWERSPORTS.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Can-Am Outlander Floorboards Long Edition and is the answer not in the manual?

Questions and answers

Summary of Contents for RJWC Can-Am Outlander Floorboards Long Edition

  • Page 1 Can-Am Outlander Floorboards Long Edition Installation Manual © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 2 We recommend following the Installation Before starting installation, make sure your ATV is off, and has cooled down. To start the installation of the RJWC Floorboards you will need to remove the stock Manual for one side of the Floorboard first.
  • Page 3 M6x16 Flange Head screws and nuts - shown in the panel. highlighted circles - Mount the “Rubber Bracket Left”. This bracket only appears on the left side. © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 4 - Secure the floorboards to the base frame with M6x30 screws for the 9mm Spacer and the M6x40 screws for the 22mm Spacer. - Use screws and nuts in the circled holes. - Repeat this for both sides. © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 5 - You can adjust the angle of the Footgrips before tightening them in place. - Secure this in place with a M6x16 screw and nut. © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 6 - Mount the Bracket Back Left/ Right to the inside of inner plastic screen. Use M6x16 screws and nuts to Panel 6L/R fasten this bracket in place. - Use M6x16 Screws and nuts © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 7 - Make sure that the lip on the plastic panel on the rear of the - The completed Floorboard assembly should look like the below footboard slot into the 1L/R Panel image © 2023 RJWC Powersports EU © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com www.RJWCPOWERSPORTS.com...
  • Page 8 To install the Left Floorboard, follow the steps and replace the ‘R’ Panel with the ‘L’ Panel. ‘1R’ becomes ‘1L’ etc. Need help? Got a question? Or just want to tell us about your day: support@rjwc.se Get in touch at: © 2023 RJWC Powersports EU www.RJWCPOWERSPORTS.com...