Advertisement
ROUGHING-IN
470mm
222.5mm
INSTALL THE NEW SINK
INSTALL THE NEW SINK
Check the desired sink location for
clearance between the backsplash
wall, faucet, fixture, and cabinet.
Position and trace the template on the
countertop as directed on the template.
Drill a 13mm pilot hole on the inside of
the cut line.
Cut out the countertop opening with a
saber or keyhole saw.
CAUTION: Risk of personal
injury or property damage.
Cast iron sinks are very heavy.
Get help lifting the sink.
Temporarily position the sink in the
countertop opening. Verify the fit and
position.
Trace a pencil line, or apply a border of
masking tape around the outside edge
of the sink.
Remove the sink from the countertop
opening.
1045199-T01-A
HARTLAND
102mm 102mm
110mm
46mm
480
mm
17mm
16mm
810mm
45mm
179mm
10.5mm
220mm
2
HARTLAND - 4S
HARTLAND - 2S
HARTLAND - 1S
13mm
Advertisement
