Download Print this page
Bittium HSAT Quick Manual

Bittium HSAT Quick Manual

Recording with 2 rip belts

Advertisement

Quick Links

Bittium HSAT™ Recording with 2 RIP belts
Quick Guide
Equipment
2
9
Equipment needed in recording:
1 . Bittium Respiro™
2. Pulse oximeter
3. Quick Guide/ Notes and Warnings
4. Nasal cannula
Do not use a broken device or cannula whose packing is opened.
Starting a recording
1
3
1
8
6
5. Two RIP belts
6. Medical tape
7.
Respiro™ Patch for 2 RIP Belts
and a spare patch
2
4
7
Equipment needed for charging
Respiro (if required):
8. Charger
9. Charger dock
3
Attach the RIP belt to the
patch as shown.
© Bittium Biosignals D0000009234, v1.1, 27.7.2023
5
4
1 (4)

Advertisement

loading
Need help?

Need help?

Do you have a question about the HSAT and is the answer not in the manual?

Questions and answers

Summary of Contents for Bittium HSAT

  • Page 1 Bittium HSAT™ Recording with 2 RIP belts Quick Guide Equipment Equipment needed in recording: Equipment needed for charging Respiro (if required): 1 . Bittium Respiro™ 5. Two RIP belts 8. Charger 2. Pulse oximeter 6. Medical tape 9. Charger dock 3.
  • Page 2 figures. In case a cannula with a mouthpiece is used, the oral part should be pointed towards your mouth. Medical tape Choking hazard! Use medical tape for securing the cannula. 2 (4) © Bittium Biosignals D0000009234, v1.1, 27.7.2023...
  • Page 3 finger. If your recording is set to The LED indicators are end automatically, skip lit in blue for 5 minutes the step 1. but you can move to the next step. 3 (4) © Bittium Biosignals D0000009234, v1.1, 27.7.2023...
  • Page 4 Connect Respiro to an outlet using the charger dock and the charger if you want to see the battery charge level. The LED indicators represent the device battery charge level. If at least two green LED indicators are blinking or all the LEDs are continuously lit, the battery charge is sufficient. 4 (4) © Bittium Biosignals D0000009234, v1.1, 27.7.2023...