Bittium OmegaSnap 1-CH ECG Electrode Quick Manual

Quick Guide - Bittium OmegaSnap™ 1-CH ECG Electrode
Bittium OmegaSnap™
1-CH ECG Electrode
The Bittium OmegaSnap™ 1-CH ECG Electrode is intended to be used
with the Bittium Faros™ ECG device for the purpose of measuring
cardiac signals (ECG).
Equipment
Bittium
Faros™
Bittium
OmegaSnap™
Adapter

Caution!

› Place the electrode onto intact, clean › Replace the electrode if it does not
skin only. stick to the skin.
› Do not use body lotion or creams in › Remove the electrode from the skin
the electrode area prior to applying the after measuring.
electrode.
› Use the electrode only with the Bittium
› Do not use outdated electrodes. Please Faros™ ECG device.
check the date on the packing material.
› The Faros device and OmegaSnap
› The electrode is for single use only. adapter must be cleaned between
Reuse of the product may cause con- users. The recommended cleaning
tamination, leading to infections. method: non-alcoholic cleaning and
disinfection wipes for medical devices,
› Stop using the Faros ECG device
for example mikrozid® sensitive wipes
and remove the electrode from the
or SaniCloth AF3 wipes.
skin if the electrode causes adverse
reactions such as skin irritation or rash. › Follow these instructions. See more
If any problems occur, please contact detailed instructions in the Faros
your clinic or person responsible for manual.
treatment.
Bittium
OmegaSnap™
1-CH ECG
Electrode
Bittium Biosignals Oy
Pioneerinkatu 6
70800 Kuopio, FINLAND
Tel: +358 (0)40 3442000
email: bbs@bittium.com or
medical.support@bittium.com
www.bittium.com
Bittium
OmegaSnap™
1-CH ECG Electrode
Quick Guide