Advertisement
iMPortant SafetY inStrUctionS
•
read the instructions.
•
Keep these instructions.
•
heed all warnings.
•
follow all instructions.
•
do not use this apparatus near water.
•
clean only with a dry cloth.
•
install only in accordance with the manufacturer's instructions.
•
refer all servicing to approved service personnel.
warning: to redUce the riSK of fire or electric ShocK, do
not eXPoSe thiS aPParatUS to rain or MoiStUre.
this apparatus has been designed with class 1 construction and
must be connected to a mains socket outlet with a protective earthing
connection (the third grounding pin).
the apparatus may be isolated from mains power either by unplugging the
power connector from the rear of the unit, or by unplugging the connector
at the opposing end of the power cord or cable from its supply outlet. as a
result, either or both of these connectors should remain accessible.
SafetY warningS
wARNINg!
RISK Of ELECTRIC ShOCK – DO NOT OPEN
ATTENTION!
NE PAS OUvRIR – RISQUE DE DÉChARgE ÉLECTRIQUE
Caution: to reduce the risk of electric shock, do not remove cover.
no user serviceable parts inside. refer servicing to qualified service
personnel.
the lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
the exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
iP20 eQUiPMent
CLIMATE
the equipment has been designed for use in moderate climates and
in domestic situations.
only use at an altitude not exceeding 2000m.
SAfETy wARNINgS
•
do not expose the unit to dripping or splashing.
•
do not place any object filled with liquid, such as a vase, on the unit.
•
do not place naked flame sources, such as lighted candles, on the unit.
TO AvOID OvERhEATINg
•
do not position the product in direct sunlight.
•
do not position the product near heat sources, such as a radiator.
•
leave at least 10cm around the product to ensure sufficient ventilation.
radio interference
fcc warning: this equipment generates and can radiate radio
frequency energy and if not installed and used correctly in
accordance with our instructions may cause interference to radio
communications or radio and television reception. it has been type-
tested and complies with the limits set out in Subpart J, Part 15 of
fcc rules for a class B computing device. these limits are intended
to provide reasonable protection against such interference in home
installations.
eec: this product has been designed and type-tested to comply with
the limits set out in en55032:2015 and en55024:2010 + a1:2015.
SPecificationS
dimensions: 1101mm x 392mm x 511mm (h x w x d)
weight: 68kg
Power: 800w max
operating temperature: Standard commercial, 0°c to 45°c
this product is available factory pre-set in the following voltage options:
100V ac 50-60hz, 110-120V ac 50-60hz, 220-240V ac 50-60hz
copyright © 2023 Meridian audio ltd.
Part no: P88566/2
designed and manufactured in the UK by Meridian audio
ltd. Meridian audio reserves the right to make changes and
improvements to any of the products described in this document
without prior notice.
ViSit US on the weB
www.meridian-audio.com
≤2000m
QUICK START
GUIDE
DSP9 DIGITAL ACTIVE
LOUDSPEAKER
Advertisement
