If you do not fully understand any portion of the following instruction manual, FOLLOWING SAFETY reach out to Utility Solutions, Inc. for assistance. To reach out by telephone, call INSTRUCTIONS (828) 323-8914, or send an email to sales@utilitysolutionsinc.com.
INTRODUCTION APPLICATIONS The Load-Ranger® FLEX-LT™ Portable Load Break Tool is designed to be used on “hook-equipped” disconnects, cutouts, switches and power fuses up to 34.5 kV and 150 Basic Insulation Level (BIL) or less. The Load-Ranger® FLEX-LT™ load break tool can safely: Break associated cable charging currents, line charging currents, and •...
Manual located on our website, at www.utilitysolutionsinc.com. The LOAD-RANGER® FLEX-LT™ Portable Load Break Tool should be stored in a clean, STORAGE dry place. Damp and/or high humidity environments should be avoided. Utility Solutions recommends storing in the hard case (USLR-XLT-HARDCASE). LOAD-RANGER® FLEX-LT™...
The below graphic offers a helpful reference when determining proper attachment. If a discrepancy exists between this manual and your work methods, always follow the procedures set forth by your work methods. For questions, contact Utility Solutions, Inc. at 828-323-8914. (Cutout Top View) Attach To Either Horn...