Resetting The Tv To Factory Condition; Resetting The Tv To Factory Condition Using Service Mode - Sony KDL-32EX305 Service Manual

DIGITAL
WB
*1 R_DRV 128
2 G_DRV 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
Please input WB items
(0 - 255)
---
7. Using the numbers buttons on the remote, enter the Data
Value for the White Balance setting
(value must be between 1 and 255).
8. Press ENT to WRITE (save) the changes.
9. To exit White Balance Adjustment, press JUMP or OPTIONS

2-4. RESETTING THE TV TO FACTORY CONDITION

Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
1. While holding down the
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
KDL-32EX305/32EX306/32EX405/40EX405/40EX406/46EX405
SERVICE
Gain
0: x 0.5, 128: x 1, 255: x1.5
Offset
128: offset 0
on the Remote Commander,
SERVICE ADJUSTMENTS
2-4-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
3. If necessary, press JUMP or OPTIONS to go to DIGITAL
mode.
4. Press .
8
"SERVICE" changes to green RST.
5. Press MUTING .
RST executes the command and displays EXE.
6. Press .
0
EXE-RST displays green, then red indicating the TV is
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER TIMER
8. Cycle AC Power (Unplug and Plug AC Cord from the
AC Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
5 + POWER
Volume
Standby Standby POWER POWER
.
26