Philips RC759 RDS User Manual page 6

MOUNTING
METAL SLEEVE
+45°
CONNECTING RADIO (fig. 9)
For Audi, Opel, Vauxhall, VW and Seat cars, use adaptor EA6259 to connect the connector of the car to
the car radio.
¢ Insert aerial plug E into aerial socket. Good reception is only possible with a good aerial.
+ Insert power supply plug A into socket A'.
* Insert loudspeaker plug B into socket B'.
* (optional) Remove the protective cover from socket C'.
* (optional) Insert the yellow line-out plug C1 into socket C1'.
* (optional) Insert the blue CD changer plug C3 into socket C3'.
* (optional) Insert the green navigation plug C2 into socket C2'.
The green plug C2 slides between the yellow plug C1 and the blue plug C3.
MOUNTING RADIO
* Reconnect the negative car battery terminal (fig. 11). Installation is now complete.
REMOVING RADIO (fig. 12)
You can unlock the radio using the two U-brackets supplied.
* Remove the front, see 'SECURITY', 'DETACHABLE FRONT'.
* Push the metal holder back up.
REPLACING FUSE (fig.9)
INTERFERENCE SUPPRESSION
Most modern cars have sufficient interference suppression. If you experience interference
generated by the car, consult your garage.
* only for certain versions