netAlly CyberScope User Manual page 773

LinkRunner AT Reflector
Follow these steps to set up a LinkRunner AT
(2000) Reflector:
1. Ensure the LinkRunner is connected to an
active network via the RJ-45 or Fiber test
port and is plugged into AC power.
2. On the Home screen, select Tools.
3. In General Configuration > Manage Power,
ensure the Auto Shutoff Enabled is
unchecked to prevent the unit from
powering down during the test. Save the
changed setting.
4. In the Tools menu, select Reflector.
Performance Test App
773