Trouble Shooting; License Conditions - Limbic Bits Sound Packs And Samples - Roland SH-01a Installation Manual

5. Once the lights stop blinking you may power cycle the SH-01A and
disconnect the USB cable and you're done.
The last three steps are crucial in order to get this sound pack working
properly.

Trouble Shooting:

1. Sometimes, you have to create a new folder called „PATCH". For
whatever reason it doesn't show up where it should be. After creating it,
place the patches inside and drag the whole folder into the RESTORE
folder on the SH01a.
2. Occasionally, the new patches don't install if there are already any files in
the BACKUP directory. So it might help to delete these after backing
them up. If the new patches don't appear on your SH-01a after you've
done this, try deleting these before trying again.
3. If this still doesn't work try to eliminate any USB Hubs in between or
disconnect other USB devices that are connected.

License Conditions - Limbic Bits Sound Packs and Samples

Please read the following agreement before using these Soundsets.
All Sounds and Samples herein are licensed, not sold to you (collectively,
„Licensee"), by Limbic Bits. The original manufacturer of the sounds
(collectively, "Licensor") will always remain the owner of the sounds. All rights
not expressly granted herein are reserved exclusively by Licensor.
We may, at our discretion, make changes to these Conditions at any time.
Any changes will be posted on this page. In some instances, we may send an
email to registered users notifying them of a change to the Conditions. You
should, however, check this page from time to time to take notice of any
changes.
1. The Licensee may use the Sounds in combination with other sounds in
music productions (which include soundtracks of films, video productions,
radio/TV programs or commercials, computer games and multimedia
presentations, library music), public performances, and other reasonable
musical purposes within musical compositions.