Advertisement
Thank you for purchasing this Tamron lens. Before using your new lens, please read the contents of this Owner's manual to properly
use the lens. Also, it will be important to read the manual of the camera to which you will attach the lens.
After reading, store this Owner's manual in a safe place.
Please read also the document "Precautions for Safe Use of Tamron Lenses" supplied with the lens for the detailed safety precautions
to observe when using Tamron lenses.
• Explains precautions that help to prevent problems.
• Explains things you should know in addition to basic operations.
PART NAMES (Refer to Fig. 1)
① Lens hood
③ Hood attaching alignment mark
⑤ Filter ring
⑦ Focus ring*
⑨ Focal length mark
⑪ AF/MF switch
⑬ Zoom ring
⑮ Connector port
⑰ Lens-camera interface contacts
* Corresponds to the control ring on Nikon Z mounts.
MAIN SPECIFICATIONS
Model
Focal Length
Maximum Aperture
Angle of View (diagonal)
Optical Construction
Minimum Object Distance (MOD)
Maximum Magnification Ratio
Filter Size
Length
Maximum Diameter
Weight
Lens Hood
Connector Type
• Length : From front end of the lens to mount surface.
• Specifications, appearance, functionality, etc., are subject to change without prior notice.
ATTACHING AND REMOVING THE LENS
Remove the rear cap of the lens. Align the lens attachment mark ⑯ and mounting mark on the camera, and then insert the lens.
Turn the lens clockwise for Sony E mounts or counterclockwise for Nikon Z mounts until it locks.
To remove the lens, turn the lens in the opposite direction while pressing the lens release button on the camera.
• Turn off the power of the camera before attaching or removing the lens.
• For details, please read the instruction manual of your camera.
SWITCHING FOCUS MODE (Ref. Figs. 1, 2)
„ AF/MF Switching (Ref. Figs. 1, 2)
To shoot using autofocus (AF), set both the camera and the AF/MF switch ⑪ on the lens to "AF". (Ref. Fig. 2) (If the lens is set at
"MF", it will not autofocus.)
To shoot using manual focus (MF), set the camera and/or the lens AF/MF switch ⑪ to "MF". For manual focus, turn the focus ring
⑦ to acquire the focus. (Ref. Figs. 1, 2)
• Under AF mode, there may be difficulty for autofocus to work depending on the subject.
• For Sony E, if your camera features an AF/MF control button, it is possible to temporarily switch to MF from AF, by pressing the
AF/MF control button. When the lens set to "AF" and the camera set to "MF", by pressing the AF/MF control button you may
temporarily switch the focus to AF.
• For Nikon Z, you may apply functions from the camera to the focus ring ⑦. (under focus mode/ AF)
• For details, please read the instruction manual of your camera.
FOCUS SET BUTTON (Ref. Fig. 1)
Press the focus set button ⑩ to use the function that has been assigned from the camera.
See the manual of the camera for more details.
CONNECTOR PORT (Ref. Fig. 1)
Lenses with the connector port ⑮ can be connected to a computer using the TAMRON connection cable (sold separately). Then, using the
" application, you will be able to update the firmware and register functions to the custom switch ⑫.
dedicated "TAMRON Lens Utility
TM
See the online help of "TAMRON Lens Utility" using the link below for more details.
https://www.tamron.com/jp/consumer/support/help/lensutility/en/
• Do not use the TAMRON connection cable (sold separately) for any purpose other than connecting the TAMRON lens equipped
with a connector port to a computer.
• Tamron will not bear any responsibility for any loss or damage of data in use of the TAMRON connection cable (sold separately).
ENGLISH
② Lens hood release button
④ Hood locking mark
⑥ Hood release mark
⑧ Focal length scale
⑩ Focus set button
⑫ Custom switch
⑭ Zoom lock switch
⑯ Lens attachment mark
35 - 150 mm
F/2-2.8
63°26' - 16°25'
15/21
0.33 m (13") (Wide) / 0.85 m (33.5") (Tele)
1:5.7 (Wide MOD) /1:5.9 (Tele MOD)
ø 82 mm
158 mm (6.2") / Sony E, 160.1 mm (6.3") / Nikon Z
ø 89.2 mm
1,165 g (41.1 oz) / Sony E, 1,190 g (42.0 oz) / Nikon Z
HA058
USB Type-C
A058
Advertisement
