Advertisement
Quick Links
Advertisement
Related Manuals for Magicshine EVO 1700
Summary of Contents for Magicshine EVO 1700
- Page 1 APP PAIRING NAME: M2-B0 EVO 1700 USER MANUAL...
- Page 2 2. DO NOT disassemble, modify, remanufacture, puncture, or damage the device or batteries. IN THE BOX Handlebar MJ-6508 remote EVO 1700 out-front mount control (incl. strap) Nylon shim Screw USB-C 2mm/3mm...
- Page 3 OPERATING INSTRUCTIONS HEADLIGHT BUTTON OPERATION: ON/OFF: Press and hold the button for 1 second ADJUST BRIGHTNESS: When the light is on, click the button to change brightness level. The output brightness will cycle through LOW→MEDIUM→HIGH. CHANGE MODE: Double click the button to change between low beam and high beam.
-
Page 4: Remote Control Instructions
REMOTE CONTROL INSTRUCTIONS Note: 1. Before first use, please open the remote's battery compartment, remove the insulating spacer, reinsert the battery, then cover the battery compartment, and the indicator on the remote will flash blue. 2. The remote control will enter sleep mode if the light is turned off for more than 48 hours without any operation. -
Page 5: Remote Control Operation
REMOTE CONTROL OPERATION: ON/OFF: Press and hold the "○"/"□" button for 1 second ADJUST BRIGHTNESS: Click the "○" button CHANGE MODE: Double click the "○" button FLASH MODE: Double click the "□" button FULL OUTPUT MODE (1700LM): Click the "□" button to go into full output mode and click the "○"/"□"... - Page 6 OUTPUT / RUNTIME 200LM 400LM 5.5H LOW BEAM MEDIUM 800LM HIGH 400LM HIGH BEAM MEDIUM 800LM HIGH 1700LM DAY FLASH 0~1700LM FLASH MODE NIGHT FLASH 400~1700LM 3.5H *All data are measured in accordance with ANSI/NEMA FL 1-2009. The test was conducted at a temperature of 25°C and a wind speed of 25 km/h.
- Page 7 HOW TO INSTALL / REMOVE 1. INSTALL THE OUT-FRONT MOUNT 2. REMOVE THE OUT-FRONT MOUNT...
- Page 8 3. REMOTE CONTROL MOUNTING Adhesive velcro hook side up...