Kettler Flexbox 600 Assembly And Operating Instructions Manual page 51

Fitting the safety belt
2.
1.
3.
4.
Figure 13: Fitting the safety belt to the seat
Important
 When fitting, ensure that the belt catch is facing outwards and the shoulder pad inwards.
 The abdominal belt should be detached from the belt catch (3) and the belt adjuster (1).
Abdominal belt
 1. Feed abdominal belt through the slot in the seat from the rear and pull it out until the sewn end (2) is
firmly fitted in position.
 2. Feed abdominal belt through the belt adjuster (1).
 3. Feed abdominal belt through the lower part of the belt catch (3) from the rear.
 4. Feed abdominal belt through the belt adjuster (1) from the other direction.
 Fasten the other abdominal belt in the same way.
Shoulder belt
 Pass the shoulder belt tab (5) through the slot in the seat rear from the front.
 Thread the belt stopper (4) into the shoulder belt tab (5).
 Pull the shoulder belt forwards until the belt stopper is in contact with the rear part.
 Fasten the remaining shoulder straps in the same way.
The shoulder straps can be fastened in three different positions, depending on the height of the child.
MY21K99_01_1.0_25.08.2023
1
2
3
KETTLER Flexbox assembly instructions
4
180°
5
15