Kettler Flexbox 600 Assembly And Operating Instructions Manual page 44

Figure 3: Fastening base sections with screws
 Screw base sections (3L) and (3R) into position on the cargo bike's cargo space with 4 washers (2) and
4 countersunk screws [M6 x 25] (1) each.
Important
 Fasten countersunk screws (1) with a torque of 6 Nm.
Fitting the rear wall
1R
Figure 4: Raising the rear wall sections
 Raise the rear wall section (1L) and (1R) on each side wall.
MY21K99_01_1.0_25.08.2023
3R
KETTLER Flexbox assembly instructions
3L
1L
1
2
8