Kettler Flexbox 600 Assembly And Operating Instructions Manual page 50

Screwing the seat into position
Figure 12: Screwing the seat to the Flexbox
 Screw both seat sides into position on the Flexbox side walls with 5 sleeve nuts (1) and 5 countersunk
screws (2) each.
 To insert the sleeve nuts into the holes provided in the seat area, put your hand through the easy
boarding opening.
Important
 Fasten countersunk screws with a torque of 6 Nm.
MY21K99_01_1.0_25.08.2023
KETTLER Flexbox assembly instructions
1
2
14