SIYI DK32S User Manual

Enterprise remote controller

Hide thumbs Also See for DK32S:

User manual (97 pages)

page of 106

/ 106
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

DK32S User Manual (V1.3)

DK32S

ENTERPRISE REMOTE CONTROLLER

USER MANUAL

V1.3

May 2022

- 1 -

Table of Contents

Need help?

Do you have a question about the DK32S and is the answer not in the manual?

Questions and answers

Summary of Contents for SIYI DK32S

Page 2 DK32S remote controller, please read this manual carefully. If you have any issue using the product, please consult the manual or check the online pages of DK32S on SIYI official website (http://en.siyi.biz/). You can also write an email to SIYI official A/S center (support@siyi.biz).
Page 3 DK32S User Manual (V1.3) SIYI User Group - Facebook SIYI YouTube Channel (https://www.youtube.com/c/SIYITech) SIYI Official AliExpress Store (https://siyi.aliexpress.com) - 3 - 2022 SIYI Tech All Right Reserved...
Page 4: Table Of Contents
3.1.2 Good Antenna Angle of Air Unit ...................... - 26 - 3.2 How to Charge DK32S Transmitter ......................- 27 - 3.3 How to Link/Bind DK32S Transmitter to DK32S Air Unit ..............- 28 - 3.4 Throttle Joystick Type ..........................- 30 - 4 MAIN MENUS ..............................
Page 5 6.8.1 RF Power ............................- 81 - 6.8.2 Transmitter/Sky Station Antenna .....................- 81 - 6.9 ESC Cali ..............................- 83 - 7 Sky Station Settings ............................- 84 - 7.1 General Settings ............................- 85 - - 5 - 2022 SIYI Tech All Right Reserved...
Page 6 8.1 Repair Service ............................- 100 - 8.2 Warranty ..............................- 100 - 8.2.1 7-Day Return & Refund ........................- 101 - 8.2.2 15-Day Replacement ........................- 102 - 8.2.3 1-Year Warranty Repair ........................- 103 - - 6 - 2022 SIYI Tech All Right Reserved...
Page 7: Read Tips
Mark 1.2 Flight Safety DK32S Radio System is designed for professional application in specific industries, users who approaches to the device should have at least the basic ability to manipulate it. Any irregular or irresponsible manipulations of the device may cause damages and lead to property loss or human injuries.
Page 8 SIYI’s products, please read the prohibited and mandatory terms carefully: Do not use DK32S Radio System to control an aircraft in places of intensive crowd (squares, parks), places of many obstructions (streets, parking lots), fields of strong magnetic or interference (power/radar stations, railways) or any other fields that may cause property loss or human injuries.
Page 9: Precautions On Charging
Considering there are many different types of chargers, please read the prohibited and mandatory carefully before charging DK32S transmitter. Do not use any USB chargers over 5V output to charge DK32S transmitter. Make sure DK32S transmitter is powered off before charging. And the charging current should not exceed 2A.
Page 10: Precautions On Using Sd Card
60℃. DANGER Keep DK32S transmitter away from any places that a baby or a kid may reach while you are charging it, and it could be better if there are supervision of any adult in case of accidents.
Page 11: Precautions On Storage/Carrying/Recycling
DK32S User Manual (V1.3) 1.5 Precautions on Storage/Carrying/Recycling CAUTION Keep DK32S transmitter away from any places that a baby or a kid may reach when you are placing or storing it. DANGER Please avoid placing or storage DK32S Radio System in places below: Places are extremely hot (above 60℃) or cold (under -20℃);...
Page 12: Product Introductions
DK32S Radio System is applied with SIYI Technology’s latest bidirectional 2.4GHz spread-spectrum technology. Maximum control range can be up to 20km (unobstructed, free of interference). DK32S transmitter and its Air Unit are linked by a unique matching code. The system comes with enhanced anti-interference performance and supports multiple transmitters working in stability synchronously.
Page 13 A perfect mate for BVR (Beyond Visual Range) flying. In the built-in screen of DK32S transmitter, it displays real-time telemetry of Air Unit voltage, battery voltage, RF signal strength, information of the GPS module, and other multi-sensors.
Page 14 Fulfils the Requirement of Complicated Models or Robotics  In default, DK32S transmitter can save up to 64 groups of data storage, the amount can be extended to limitless if necessary.  Powerful programming and mixing, various and customized linear/curve mixing.
Page 15: Parts
DK32S User Manual (V1.3) transmitter. DK32S transmitter runs continuously for more than 12 hours after full charging. You won’t have to worry about long-time flight outdoors. SD Card Data Saving and Transfer DK32S transmitter supports saving/copying/transferring model configuring data through an SD card.
Page 19: Sub-Trim Button
Mark: Self-locking button stays in the depth you press them to, while self-resetting button bounces back. 2.2.3 Sub-Trim Button  There are 2 Sub-Trim buttons on DK32S transmitter, which support continuous trimming to all 4 channels. - 19 - 2022 SIYI Tech All Right Reserved...
Page 20: Technical Specifications
Press and hold left/right Sub-Trim button to unlock transmitter. Mark: Please refer to “Sub-Trim Settings” menu to do configuration of Sub-Trim button. 2.3 Technical Specifications Channels 16 Physical Channels, 16 Communication - 20 - 2022 SIYI Tech All Right Reserved...
Page 21 Built-in 3.7 V 5000 mAh Li-Po 1S battery Working Current 270 mA Battery Life 12 hours Charging Port Micro-USB port Product Dimension 194.5 x 172.5 x 114 mm Product Weight 610 g - 21 - 2022 SIYI Tech All Right Reserved...
Page 22: Led Indicator Definition
DK32S User Manual (V1.3) 2.4 LED Indicator Definition On DK32S transmitter, there are two LED indicators. The left one is Status Indicator, the right one is Charging Indicator.  Status indicator displays transmitter’s RF status.  Charging indicator displays transmitter’s charging status.
Page 24 DK32S User Manual (V1.3) Mark: DK32S has the best signal strength when they are placed horizontally. Thus, please avoid pointing antennas’ upper end straightly to your aircraft and do not fold the antennas. - 24 - 2022 SIYI Tech All Right Reserved...
Page 25: Good Antenna Angle Of Transmitter
DK32S User Manual (V1.3) 3.1.1 Good Antenna Angle of Transmitter Aircraft in front of the transmitter Aircraft above the transmitter - 25 - 2022 SIYI Tech All Right Reserved...
Page 26: Good Antenna Angle Of Air Unit
3.1.2 Good Antenna Angle of Air Unit Flying high (Altitude higher than 10 meters, antennas should be placed downwards) Flying low (Altitude lower than 10 meters, antennas should be placed upwards) - 26 - 2022 SIYI Tech All Right Reserved...
Page 27: How To Charge Dk32S Transmitter
3.2 How to Charge DK32S Transmitter Before charging the DK32S transmitter, please read the part “1 READ TIPS - 1.3 Precautions on Charging” carefully. Please us original OTG Micro-USB cable coming in DK32S packing list to plug into the Micro-USB port on transmitter and the USB charger.
Page 28: How To Link/Bind Dk32S Transmitter To Dk32S Air Unit
Solid Green: Charging is finished. 3.3 How to Link/Bind DK32S Transmitter to DK32S Air Unit Each unit of the DK32S transmitter is assigned with a unique ID code. Before linking DK32S transmitter to DK32S Air Unit, the Air Unit identifies transmitter ID (Linking/Binding) first.
Page 29 4. Tap on “Link - Start” and wait for a second, if transmitter indicator and Air Unit indicator both blink green, linking is finished. WARNING Before linking transmitter to Air Unit, please make sure your aircraft motors have no power supply (E.S.C are off connection). - 29 - 2022 SIYI Tech All Right Reserved...
Page 30: Throttle Joystick Type
DK32S transmitter supports both “Thumb-slide” and “Self-centering” throttle joysticks. Users decide which type to use according to their preference. Generally, if your DK32S transmitter has been set up as “Thumb-slide” throttle joystick, then the throttle type in “System Settings” should be “Thumb-slide” as well.
Page 32: Main Menus
Displays the name of the selected model. Model Type Displays the selected model type. Battery Level Real-time monitoring of VD32 transmitter’s battery level. Settings Approach to the “Transmitter Settings” menu. Air Unit Voltage - 32 - 2022 SIYI Tech All Right Reserved...
Page 33 A SD card is inserted in VD32 transmitter (the icon disappears when the SD card is taken out). Timer Displays maximum two timers as to assist users with the flight. Signal Strength Real-time displays of the RF transmitting signal quality. - 33 - 2022 SIYI Tech All Right Reserved...
Page 34: Model Settings
DK32S User Manual (V1.3) 5 MODEL SETTINGS In DK32S transmitter’s “Model Settings” menu there are a series of useful functions, offering basic and advanced settings for different kinds of model devices. CH Monitor (Channel Monitor) Real-time display of all channels’ output value.
Page 35 Real-time voice broadcast specialized for agricultural drones. JstkDeadZone (Joystick Dead Zone) Filter mistaken manipulation caused by touching joysticks unintentionally. MultiDroCtrl (Multi-Drone Control) Control the flight of up to three drones at the same time through one transmitter. - 35 - 2022 SIYI Tech All Right Reserved...
Page 36: Channel Monitor
Model Select page is for users to select, rename, copy, and reset model data. 5.2.1 Select a Model FT24 transmitter supports up to 64 storage groups for saving and selecting data. - 36 - 2022 SIYI Tech All Right Reserved...
Page 37: Rename A Model
Users can rename a group of model data to make difference. And the selected model name displays in transmitter menu. Steps 1. Tap on a model name, then “RNM(Rename)”. It comes “Confirm renaming”. Tap on “Yes”, it comes a virtual keyboard menu. - 37 - 2022 SIYI Tech All Right Reserved...
Page 38 2. Input a new name for the model by using the virtual keyboard, then tap on “yes” to finish. About Virtual Keyboard CAPS Switch keyboard to input capital letters. SCAP Switch keyboard to input lower case letters. - 38 - 2022 SIYI Tech All Right Reserved...
Page 39: Copy A Model
Users can copy a model data for backup and easy sharing. Steps 1. Tap on a model name, then “Copy”. It comes “Copy a Model”. 2. Select the target model on the turntable, then tap on “Yes” to finish. - 39 - 2022 SIYI Tech All Right Reserved...
Page 40: Reset All Models
Reset is to clear all saved data in the model list to the default settings. Steps 1. Tap on “Reset”, it comes “Confirm to reset”; 2. Tap on “Yes” to finish. - 40 - 2022 SIYI Tech All Right Reserved...
Page 41: Model Type
DK32S User Manual (V1.3) 5.3 Model Type In the DK32S transmitter there are several default model types, Fixed-wings / Gliders, Multi-rotors (racing drones, agricultural drones) and the others (helicopters), each model type with its default settings done in advance. Users can choose a model type according to their requirement and customize the settings.
Page 42: One Move To Do Agricultural Drone Settings
3. Tap on a model type according to your requirement, then “Apply” to finish. 5.3.2 One Move to Do Agricultural Drone Settings Through the DK32S transmitter users can finish agricultural drone settings easily. Users just pick a FC(Flight Controller) type and an ESC(Electronic Speed...
Page 43 3. Calibrate the transmitter joysticks in the ground station of the flight controller and finish the Fail-safe settings, then you will be ready for unlocking motors and taking flight. (Please watch tutorial videos more detail: http://siyi.biz/cn/DK32S/video/) - 43 - 2022 SIYI Tech All Right Reserved...
Page 44: End Point
“-limit / limit+” stands for the minimum/maximum limit value); 3. Select a channel and its output value, press the “+” or “-” button on transmitter to adjust value or limit (-150 ~ 150). - 44 - 2022 SIYI Tech All Right Reserved...
Page 45: Channel Mapping
1. Go to “Model” page, tap on “CH Mapping”. 2. The page displays information as in the picture below. Tap on middle boxes will lead to a list of all joysticks, switches, buttons, and dials. - 45 - 2022 SIYI Tech All Right Reserved...
Page 46 Mark  In “Channel Mapping” page, if you are to redefine a channel, tap on the channel name, it comes a list of definition to all transmitter channels. - 46 - 2022 SIYI Tech All Right Reserved...
Page 48 DK32S User Manual (V1.3) DK32S Transmitter’s Channel Definition Introductio Sub-Trim Mapping After channel mapping configuration, users can set Sub-Trim mapping accordingly through LT/RT switches. - 48 - 2022 SIYI Tech All Right Reserved...
Page 49: Channel Reverse
Users can reverse channel output in “Channel Reverse” page. Steps 1. When your FT24 transmitter is bond to a new Air Unit, please check and if all servos, buttons, and switches are mapped to correct channels as you need. - 49 - 2022 SIYI Tech All Right Reserved...
Page 50: Sub-Trim
4. The page displays information as in the picture below. Enter a channel once to select, twice to change it into “Normal” or “Reversed”. Mark: Enter “Reset” to reset all channels. 5.7 Sub-Trim - 50 - 2022 SIYI Tech All Right Reserved...
Page 51 2. Select a channel according to your requirement; use the virtual turntable to select a target middle channel value; 3. Repeat step 2 if you are to adjust any other channels. - 51 - 2022 SIYI Tech All Right Reserved...
Page 52: Trim Settings
That is, when the trim setting value is changed in 5, the trim stepping value changes in 1. The DK32S transmitter’s trim setting value is default to be 5, the minimum limit of the trim setting value is 0, the maximum limit is 100; the minimum limit of the trim stepping value is 0, the maximum limit is 20.
Page 53 3. Use the virtual turntable to select a target trim stepping value, the adjustable range is from 0 to 100; 4. Tap on “Return” to finish. Mark: In the trim settings menu, tap on “Reset” to reset all channels. - 53 - 2022 SIYI Tech All Right Reserved...
Page 54: Trainer Mode
5.9 Trainer Mode Trainer Mode (Master-Slave) helps experienced RC Hobbists train new talents. Under this mode, two DK32S transmitters can be linked through a trainer cable or be linked wirelessly. All channels are open for trainer mode, users decide which channel to use, and through a physical switch you can switch between master transmitter and slave transmitter.
Page 55: Steps Through Using Trainer Cable
4. When you are to define a physical switch for trainer mode control, tap on “NULL”, it displays “select a switch by operating it”. Then operate a switch, it goes to switch status page for defining its stages. - 55 - 2022 SIYI Tech All Right Reserved...
Page 56: Steps Of Wireless Trainer
6. If you turn on Joystick Control, master transmitter will take over control immediately by operating joysticks. 5.9.2 Steps of Wireless Trainer 1. Go to “Trainer Mode” page. It displays a list of all 16 channels. - 56 - 2022 SIYI Tech All Right Reserved...
Page 57 7. Wireless trainer setting is finished successfully. Mark: Slave Transmitter Indicator Green: Master and slave transmitter in communication. Slave Transmitter Indicator Yellow: Master and slave transmitter off communication. - 57 - 2022 SIYI Tech All Right Reserved...
Page 58: Fail Safe
Master Transmitter Indicator Yellow: Master transmitter and Air Unit off communication. 5.10 Fail Safe Before linking the DK32S transmitter to the sky station, do not forget to do fail-safe settings and turn on the function. Thus if the transmitter lost link with the sky station, the fail-safe function will run automatically and immediately to protect the aircraft from a crash.
Page 59 6. The virtual turntable helps users to adjust channel value more accurately when it is very close to the target value. WARNING For flight safety, the fail-safe settings must be done and the function must be turned on. - 59 - 2022 SIYI Tech All Right Reserved...
Page 60: Timer
DK32S User Manual (V1.3) 5.11 Timer In the DK32S transmitter main menu there are two timers. Timing Mode Up: Counts from 0, the timer alerts when it reaches the time. Down: Counts from the start time, the timer alerts when it is back to 0.
Page 61: Voltage Alert
DK32S User Manual (V1.3) 5.12 Voltage Alert When the user’s aircraft power voltage is lower than the safe level, the DK32S transmitter will vibrate and send voice alert. Steps 1. In the model settings menu, tap on “Voltage Alert”, in the screen it shows the voltage alert menu;...
Page 62: Farming Voice
3. Select a switch and a position; in the screen menu it shows the voice list; select a voice to define the switch; 4. Repeat step 3 if you are to define the other switches. - 62 - 2022 SIYI Tech All Right Reserved...
Page 63 SpON (SprayON): Turn on spraying. SpOFF (SprayOFF): Turn off spraying. RTH (RtnHome): Drone return to home RTB (RtnBreak): Drone return to breakpoint Loit. (Loiter): Loiter Mode RaON (RadarON): Turn on radar - 63 - 2022 SIYI Tech All Right Reserved...
Page 64: Joystick Dead Zone
LtOFF (LightOFF): Navigation light off 5.14 Joystick Dead Zone By setting a certain dead zone range, the DK32S transmitter helps user filter out channel values which are input by touching the joysticks unintentionally. When the range is set, the channel value does not change if the joysticks stay moving in the range;...
Page 65: Multi-Drone Control
3. Tap on “Return” to finish. 5.15 Multi-Drone Control Through one DK32S transmitter users can control up to three drones at the same time. Switch Drone The function is to switch the control of linked drones, from drone No.1 to No.3.
Page 66 “MultiDroCtrl” menu, tap on “NoLink” of the drone No.1; When the indicator is on green, linking is finished. 5. Repeat Step 4 for drone No.2 and drone No.3 to finish all the linking process. - 66 - 2022 SIYI Tech All Right Reserved...
Page 68 LD Calibrtn (LD Calibrating): Calibrate the left dial (LD) EXT/IMT Stt (Export/Import Setting Data): Export the transmitter settings or model settings Power Ratio: Adjust the power ratio ESC Cali: Calibrate ESC through PWM ports on the sky station - 68 - 2022 SIYI Tech All Right Reserved...
Page 69: General Settings
DK32S User Manual (V1.3) 6.1 General Settings General Settings Menu Introduction Link (Linking): Start linking the DK32S transmitter to the sky station. Lang. (Language): Switch the system language between Chinese/English. Thrttl (Throttle Type): Switch the throttle joystick type between “Self-centering” and “Thumb-slide”.
Page 70: Screen Lock & Display
(1500) the next time you power on the transmitter; when it is “Saved”, the RD channel stays at the channel value before the last powering off. 6.2 Screen Lock & Display - 70 - 2022 SIYI Tech All Right Reserved...
Page 71: H / W Settings
DK32S User Manual (V1.3) Users can turn on / off the screen lock, set the waiting time, adjust the screen brightness and the screen sleep waiting time of the DK32S transmitter. Screen Lock and Display Introduction Screen Lock: The touchscreen lock is disabled when the screen lock is enabled.
Page 72 How to Define the S1 / S4 / S5 / S6 Switch In the H / W settings menu, select a switch according to your requirement, tap on “Self-locking / Self-resetting” to define the working mode. - 72 - 2022 SIYI Tech All Right Reserved...
Page 73: Extending Ports Settings
6.4 Extending Ports Settings The extending ports function help users extend transmitter function to external hardware devices and SDK. Currently the DK32S transmitter supports a Micro-USB port, a USB port and a 4-Pin Groove Port (DATA1). The Assigned Function to the Extending Ports Micro-USB: Charging, parameter adjustment, firmware upgrading and datalink output.
Page 74 (please refer to the DK32S Sky Station User Manual for more); 5. Under “GPS” mode, the DATA1 port supports the GPS module. Agricultural drone pilots use the GPS module with the DK32S transmitter to mark flight points; 6. Under “SDK”, the DATA1 port supports output of the joystick channel value. Tap on “+ / -”...
Page 75: Joystick Calibrating
2. The cross coordinate system displays the real-time position of the joysticks; 3. Tap on “Start”, in the screen it pops up “Confirm if both the joysticks are in the middle position”; - 75 - 2022 SIYI Tech All Right Reserved...
Page 76 6. When the detecting is finished, push both joysticks to the maximum position and move them in circle for several times; 7. Tap on “Finish” when it is over. - 76 - 2022 SIYI Tech All Right Reserved...
Page 77: Ld Calibrating
“Calibrating LD’s middle position, do not move LD”; 4. Please do not touch the left dial until it shows “LD to the maximum and minimum position”; follow the hint and repeat it several times; - 77 - 2022 SIYI Tech All Right Reserved...
Page 78: Export/Import Setting Data
5. Tap on “Finish” when it is over. 6.7 Export/Import Setting Data Through the export setting function users can export the data of system settings and model settings to the SD card so as to share the data to another DK32S transmitter. Steps to Export Setting Data 1.
Page 79 4. In the screen it pops up “Confirm to export” dialog, tap on “Confirm” to finish. Steps to Import Setting Data 1. Connect the DK32S transmitter to the computer via USB cable, and open the “SIYI Assistant” software; 2. Import the setting data saved in the SD card to the computer through a SD card reader, the files are in format “.CFG”.
Page 81: Rf Power
2. In the system settings menu, tap on “Power Ratio”, in the screen it shows the power ratio menu; 3. Tap on “RF Power” to choose “10dBm” or “27dBm” for power output; 4. Tap on “Return” to finish setting. 6.8.2 Transmitter/Sky Station Antenna - 81 - 2022 SIYI Tech All Right Reserved...
Page 82 3. Tap on “Tx/Rx ANT” to choose “ANT1/2” or “DualATN” for transmitter/sky station antenna; 4. Tap on “Return” to finish. CAUTION Please make sure that the distance between your transmitter and sky station is within 2 meters long. - 82 - 2022 SIYI Tech All Right Reserved...
Page 83: Esc Cali
6.9 ESC Cali The DK32S transmitter simplified the ESC calibration a lot. Users just connect their ESC to the DK32S sky station’s PWM port 1 to 8, then follow the tips in the screen menu or the steps below to finish calibration.
Page 85: General Settings
3. When it is done, the status indicator of the sky station blinks green in all modes, and the blinking speed indicates the signal strength. Faster it blinks, weaker the signal strength is. - 85 - 2022 SIYI Tech All Right Reserved...
Page 86: Automatic Linking
7.1.3 Voltage Telemetry When the voltage telemetry function is turned on, in the PWR (power) column of the DK32S transmitter main menu, users can check the real-time display of the aircraft voltage telemetry. 7.1.4 Remote Control Relay The function helps users with long distance flight relay.
Page 87: Voltage Calibrating
DK32S User Manual (V1.3) 1. Prepare two DK32S transmitters, mark them with 1 and 2; 2. Please link the transmitter 1 to the sky station first, then turn on “Remote Control Relay” in the “General Settings Relay” menu; the transmitter 1 is the slave transmitter;...
Page 88: Pwm Settings
7.3 PWM Settings In the DK32S transmitter and the PWM mode, users can redefine the output channel of the sky station (channel 1-9 in default), so that if the channel 9 is already working in SBUS or PPM mode, the PWM ports 1 to 8 can still output to the channels 1 to 16 of the transmitter.
Page 89 3. In the “PWM Settings” menu, tap on a PWM port and select a channel through the virtual turntable in the screen according to your requirement; 4. Tap on “SET” to finish. - 89 - 2022 SIYI Tech All Right Reserved...
Page 90: Video Transmission / Datalink Settings
Link Status: Check the link status of the transmitter in real-time. Video Stts (Video Transmission Settings): Set basic functions of the video transmission module. Navi. Light (Navigation Light): Set the basic functions of the navigation light. - 90 - 2022 SIYI Tech All Right Reserved...
Page 91: Basic Settings
A-USB output, Micro-USB output and Bluetooth output. Flight Controller: Select a flight controller. The DK32S transmitter supports all major flight controllers in market such as TOPXGUN (T1-A), WOOZOOM (THEONE-A), EFY (FINIX200M), BOYING (PALADIN), CHIAO (MATRIX), JIYI (K3-A), CFUAS (C1-A) and other flight controllers under open source Mavlink agreement such as PIX and APM.
Page 92: Advanced Settings
If your flight controller type was not in the list, you can set a baud rate to match your flight controller. Steps Make sure that the sky station is linked with the transmitter; in the “Advanced Settings” menu, tap on “Baud Rate” and input the baud rate. - 92 - 2022 SIYI Tech All Right Reserved...
Page 93: Bluetooth
Standard: For any flight controllers except the Topxgun T1-A. Topxgun: For the Topxgun T1-A flight controller. 8.4 Link Status The link status function helps users check the detail signal and link status of the DK32S transmitter in real-time. - 93 - 2022 SIYI Tech All Right Reserved...
Page 94: Video Transmission Settings
Device: Displays the video transmission module’s serial number. Power: Power on/off the video transmission module. Link: Link the transmitter with the video transmission module. 8.6 Navigation Light Users can power on/off the navigation light on the drone. - 94 - 2022 SIYI Tech All Right Reserved...
Page 95: Firmware Upgrade
DK32S User Manual (V1.3) 9 Firmware Upgrade DK32S ground unit and DK32S air unit support firmware upgrading through PC software. Before upgrading, it is necessary to prepare the tools, software, and firmware below.  SIYI Assistant (PC Software)  DK32S Ground Unit Firmware ...
Page 96 Firmware Upgrade Steps Install “SIYI Assistant” into your Windows device. Connect the OTG cable to the Windows device’s USB-A port and the DK32S ground unit’s Micro-USB port. Run “SIYI Assistant” and switch to the “Upgrade” page to check DK32S ground unit’s current firmware version.
Page 97 DK32S User Manual (V1.3) If the DK32S ground unit’s firmware is not the latest, then click the “Select File” button in the “RC” line to import the latest ground unit firmware. Then click “Upgrade” and wait till it is “100%” finished.
Page 98 Mark Only when DK32S ground unit and air unit are bound, you can check both ground unit and air unit firmware in SIYI Assistant software. - 98 -...
Page 99: After-Sale Service
10 After-sale Service If there were any questions or problems using SIYI Technology’s product, you can always try to send an email to SIYI Official A/S Center (support@siyi.biz) or consult your sales representative or dealer for answers or solutions. - 99 -...
Page 100: Repair Service
 Product Defect  Product Damage SIYI products under the two situations can be sent back to SIYI for repairing. Defect products with valid warranty can be repaired for free. Defect products without valid warranty or damaged products should be charged of repair fees after repairing.
Page 101: 7-Day Return & Refund
It is requested beyond seven (7) calendar days of receiving a product. A product sent to SIYI for Return & Refund Service does not include all original accessories, attachments or packaging, or any item is not in new or like-new condition, i.e., with cracks, dents, or scratches.
Page 102: 15-Day Replacement
Damage is caused to the product by uncontrollable external factors, including fire, floods, high winds, or lightning strikes. A product is not delivered to SIYI within seven (7) calendar days after Return & Refund Service confirmation is sent from SIYI.
Page 103: 1-Year Warranty Repair
Damage is caused by uncontrollable external factors, including fires, floods, high winds, or lightning strikes. Received product has not been sent back to SIYI seven (7) calendar days after replacement confirmation from SIYI. Proof of damage during transit issued by the carrier cannot be provided.
Page 104 Charges may apply for services not covered by this Limited Warranty. Please contact SIYI for information specific to your location. Please note that the warranty service is only available in the respective SIYI service regions where you purchased your SIYI product.
Page 105 Damage caused by operating the unit with a low-charged or defective battery. Products or parts with an altered identification label or from which the identification label has been removed. - 105 - 2022 SIYI Tech All Right Reserved...

SIYI DK32S User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for SIYI DK32S

Summary of Contents for SIYI DK32S

Table of Contents