SIYI DK32S User Manual

Hide thumbs Also See for DK32S:

User manual (106 pages)

Table Of Contents

Table of Contents

Quick Links

DK32S Transmitter User Manual (V1.0.3)

DK32S TRANSMITTER USER MANUAL

Thank you for purchasing SIYI Technology's product. DK32S is a professional, intelligent and

universal radio transmitting and receiving system, applied with advanced SHTT digital frequency

hopping technology. To maintain a safe and orderly public space and to ensure you a good using

experience of DK32S transmitter, please read this manual carefully. If you have any issue using

the product, please consult the manual or check online pages of DK32S on SIYI Technology's

official website (http://www.siyi.biz). You can also inquire our after-sale service coordinator

(support@siyi.biz).

- 1 -

Table of Contents

Need help?

Do you have a question about the DK32S and is the answer not in the manual?

Questions and answers

Summary of Contents for SIYI DK32S

Page 1 To maintain a safe and orderly public space and to ensure you a good using experience of DK32S transmitter, please read this manual carefully. If you have any issue using the product, please consult the manual or check online pages of DK32S on SIYI Technology’s official website (http://www.siyi.biz).
Page 2: Table Of Contents
3.1.2 Good Antenna Angle of Sky Station ..................- 24 - 3.2 How to Charge the DK32S Transmitter .................... - 25 - 3.3 How to Link a DK32S Transmitter to a DK32S Sky Station ............- 26 - 3.4 Throttle Joystick Type ........................- 28 - 4 MAIN MENU...............................
Page 3 DK32S Transmitter User Manual (V1.0.3) 5.3 Model Type............................- 39 - 5.3.1 How to Select a Model Type....................... - 39 - 5.3.2 One Move to Do Agricultural Drone Settings ................- 40 - 5.4 End Point ............................. - 42 - 5.5 Channel Mapping..........................
Page 4 DK32S Transmitter User Manual (V1.0.3) 7.1.3 Voltage Telemetry........................- 82 - 7.1.4 Remote Control Relay ......................... - 82 - 7.2 Voltage Calibrating ..........................- 83 - 7.3 PWM Settings ............................. - 84 - 8 Video Transmission / Datalink Settings ....................- 86 - 8.1 Basic Settings .............................
Page 5: Read Tips
Non-adult users must follow their trainer’s guidance or the supervision of any adult. Disassembling or modification on the DK32S transmitter is prohibited without the permission from SIYI Technology.
Page 6 SIYI’s products, please read the prohibited and mandatory terms carefully: Do not use DK32S transmitter to control an aircraft in places of intensive crowd (squares, parks), places of many obstructions (streets, parking lots), fields of strong magnetic or interference (power/radar stations, railways) or any other fields that may cause property loss or human injuries.
Page 7: Precautions On Charging The Dk32S Transmitter
Considering there are many different types of chargers, please read the prohibited and mandatory carefully before charging the DK32S transmitter. Do not use any USB chargers over 5V output to charge the DK32S transmitter. Make sure the DK32S transmitter is powered off before charging. And the charging current should not exceed 2A.
Page 8: Precautions On Using Sd Card
DK32S Transmitter User Manual (V1.0.3) DANGER Keep the DK32S transmitter away from any places that a baby or a kid may reach while you are charging it, and it could be better if there are supervision of any adult in case of accidents.
Page 9 DK32S Transmitter User Manual (V1.0.3) DANGER Please avoid placing or storing the DK32S transmitter in places below: Places are extremely hot (above 60℃) or cold (under -20℃); Places with direct sunshine, places are too dusty or wet; Places with an unstable structure or may cause vibration;...
Page 10: Product Introduction
Extraordinary Handling & Accurate Manipulating Experience The DK32S transmitter fits any users’ palm perfectly by applying a fashionably streamlined and compact industrial design, a delicate ergonomics design and even a thoughtful matte silicone pad as additional protection. All these ideas and results enable you to free your mind before taking off flight.
Page 11 BVR (Beyond Visual Range) flight. In the built-in screen of the DK32S transmitter, it displays real-time telemetry of the sky station voltage, aircraft power, transmission signal strength, information of the GPS module and other multi-sensors.
Page 12 Fulfils the Requirement of Complicated Models or Robots  In default, the DK32S transmitter can save 64 sets of model data, the amount can be extended to limitless if necessary.  Powerful programmable mixing control supports various customized linear mixing and curve mixing.
Page 13 12 hours after a charge. You’ll never have to worry about long-time flight in outdoor. SD Card Data Saving and Extending The DK32S transmitter supports saving flight data in a SD card and copying data to another transmitter after that. Adjust Transmitter Settings and Upgrade Firmware on PC The DK32S transmitter supports adjusting system settings and upgrading firmware through the PC software “SIYI Assistant”.
Page 17: Button/Switch Types
DK32S Transmitter User Manual (V1.0.3) 2.2.2 Button/Switch Types Name Type 3-stage Switch 3-stage Switch 3-stage Switch 3-stage Switch Self-centering Dial Thumb-slide Dial Self-resetting Button Self-locking Button Self-locking Button Self-resetting Button Self-resetting Button Self-resetting Button Mark: Self-locking button stays in the position you press them to; Self-resetting button rebound to original position after a press.
Page 18: Sub-Trim Button
DK32S Transmitter User Manual (V1.0.3) 2.2.3 Sub-trim Button  There are 2 sub-trim buttons on DK32S transmitter, which support continuous sub-trim on all 4 channels.  Each sub-trim button has 2 dimensions (up-down, left-right) for direct trim settings to mapped channel.
Page 19: Technical Specifications
DK32S Transmitter User Manual (V1.0.3)  Sub-trim buttons can also be used to unlock transmitter system menu when transmitter lock is activated. Press and hold left/right sub-trim button to unlock transmitter. Mark: Please refer to “Sub-trim Settings” menu to adjusting settings of Sub-trim button.
Page 20: Led Indicator Definition
Product Weight 610 g 2.4 LED Indicator Definition On DK32S transmitter, above touch screen there are two LED indicators. The left one is status indicator, the right one is charging indicator.  Status Indicator: displays transmitter’s RF transmitting status.  Charging Indicator: displays transmitter’s charging status.
Page 22 DK32S Transmitter User Manual (V1.0.3) Mark: Transmitter antennas reach the best signal strength when they are placed horizontally (A). Thus, please avoid pointing antennas’ upper end directly to your aircraft (B) and do not fold the antennas (C). 2019 SIYI Tech All Right Reserved...
Page 23: Good Antenna Angle Of Transmitter
DK32S Transmitter User Manual (V1.0.3) 3.1.1 Good Antenna Angle of Transmitter Aircraft in front of the transmitter Aircraft above the transmitter 2019 SIYI Tech All Right Reserved - 23 -...
Page 24: Good Antenna Angle Of Sky Station
DK32S Transmitter User Manual (V1.0.3) 3.1.2 Good Antenna Angle of Sky Station Flying at a high altitude (Altitude higher than 10 meters, antennas should be placed downwards) Flying at a low altitude (Altitude lower than 10 meters, antennas should be placed...
Page 25: How To Charge The Dk32S Transmitter
3.2 How to Charge the DK32S Transmitter Before charging the DK32S transmitter, please read the part “1 READ TIPS - 1.3 Precautions on Charging the DK32S Transmitter” carefully.
Page 26: How To Link A Dk32S Transmitter To A Dk32S Sky Station
DK32S Transmitter User Manual (V1.0.3) 3. Find the Micro-USB cable packed with the DK32S transmitter, connect its Micro- USB end to the Micro-USB port on the back of the DK32S transmitter, and its USB end to the charger; 4. Plug the charger into adapted AC power outlet;...
Page 27 2. In the DK32S transmitter screen menu, tap on “System Settings – General Settings”; 3. On the DK32S sky station, stick a pin or needle into the sky station’s linking hole, press and hold the linking button for 3 seconds till the sky station’s status indicator blinks a fast red;...
Page 28: Throttle Joystick Type
3.4 Throttle Joystick Type The throttle joystick of the DK32S transmitter has two types, thumb-slide and self- centering. Users can decide to use which type according to their preference. Thumb-slide Joystick: While users are powering on the transmitter, it alerts with voice broadcast if the throttle joystick is not in its bottom position, and disables RF transmitting automatically (the transmitter status indicator is off).
Page 29 DK32S Transmitter User Manual (V1.0.3) Steps In the “System Settings” menu, tap on “General Settings”, then tap on “Throttle – Thumb-slide / Self-centering” to choose your favorite type. 2019 SIYI Tech All Right Reserved - 29 -...
Page 30: Main Menu
Model Name: Displays the name of the selected model. Model Type: Displays the selected model type. Battery Level: Real-time display of the DK32S transmitter’s battery level. Settings: Approach to the “Transmitter Settings” menu. Sky Station Voltage: Real-time display of the sky station’s voltage telemetry.
Page 31 Screen Lock: The main menu is locked, the touchscreen is disabled (the icon disappears when main menu is unlocked). SD Card: A SD card is inserted in the DK32S transmitter (the icon disappears when the SD card is taken out).
Page 32: Model Settings
DK32S Transmitter User Manual (V1.0.3) 5 MODEL SETTINGS In the DK32S transmitter’s “Model Settings” menu there are a series of useful functions, offering basic and advanced settings for different kinds of model devices. CH Monitor (Channel Monitor): Real-time display of all channels’ output value.
Page 33 DK32S Transmitter User Manual (V1.0.3) CH Reverse (Channel Reverse): Reverse a channel’s output direction. Sub-trim: Do trim adjustment to your aircraft’s flight attitude. Trim Setting: Adjust the stepping value of the sub-trim function. Trainer Mode: One on one training through two transmitters.
Page 34: Channel Monitor
The Model Select function supports users to select, rename, copy and reset model data. 5.2.1 Select a Model In the DK32S transmitter’s default model list there are up to 64 sets of model data for your selection. 2019 SIYI Tech All Right Reserved...
Page 35: Rename A Model
DK32S Transmitter User Manual (V1.0.3) Steps to Select a Model 1. In the “Model Settings” menu, tap on “Model Select”, in the screen it shows the model select menu; 2. Tap on a model name, then “Select”, in the screen it pops up “Confirm your selection”, tap on “Yes”...
Page 36 DK32S Transmitter User Manual (V1.0.3) 2. Input a new name for the model by using the virtual keyboard, then tap on “yes” to finish. About Virtual Keyboard CAPS: Switch keyboard to input capital letters. SCAP: Switch keyboard to input lower case letters.
Page 37: Copy A Model
DK32S Transmitter User Manual (V1.0.3) Backspace: Delete what is already input. Cancel: Cancel inputting, the transmitter will not save the input. 5.2.3 Copy a Model Users can copy a model data from the transmitter’s default model list for backup. By doing so, you will not have to input all the data again for a new model.
Page 38: Reset All Models
DK32S Transmitter User Manual (V1.0.3) 5.2.4 Reset all Models Users can reset all the data in the model list to the default settings. Steps 1. In the Model Select menu, tap on “Reset”, in the screen it pops up “Confirm to reset”;...
Page 39: Model Type
DK32S Transmitter User Manual (V1.0.3) 5.3 Model Type In the DK32S transmitter there are several default model types, Fixed-wings / Gliders, Multi-rotors (racing drones, agricultural drones) and the others (helicopters), each model type with its default settings done in advance. Users can choose a model type according to their requirement and customize the settings.
Page 40: One Move To Do Agricultural Drone Settings
3. Tap on a model type according to your requirement, then “Apply” to finish. 5.3.2 One Move to Do Agricultural Drone Settings Through the DK32S transmitter users can finish agricultural drone settings easily. Users just pick a FC(Flight Controller) type and an ESC(Electronic Speed Controller)
Page 41 DK32S Transmitter User Manual (V1.0.3) settings, voice broadcast and datalink function settings will be finished automatically. CAUTION Make sure the transmitter and the sky station are linked before doing agricultural drone settings. When the settings are finished, do not forget to calibrate the transmitter joysticks before unlocking motors and taking a flight.
Page 42: End Point
DK32S Transmitter User Manual (V1.0.3) 5.4 End Point The end point function helps users adjust the channel values and the maximum / minimum limit. Steps 1. In the model settings menu, tap on “End Point”, in the screen it shows the end point menu (“-E.P.A+”...
Page 43: Channel Mapping
Mark: In the end point menu, tap on “Reset” at upper right corner screen to reset all channel values. 5.5 Channel Mapping All 16 channels of the DK32S transmitter can be mapped randomly to joysticks, switches, buttons and dials on transmitter. Steps 1.
Page 44 DK32S Transmitter User Manual (V1.0.3) 2. Take an example of channel 1 (aileron), tap on “J1”, in the screen it shows the transmitter channel list; 3. Select a joystick, a switch, a button or a dial from the list according to your requirement;...
Page 45 DK32S Transmitter User Manual (V1.0.3) Mark:  In the channel mapping menu, if you are to redefine a channel, tap on the channel name, in the screen it shows the definition list of all the transmitter channels; select a definition from the list to finish.
Page 47: Channel Reverse
DK32S Transmitter User Manual (V1.0.3) When the channel mapping settings is done, users can set the digital sub-trim mapping according to their preference. The default channel definition of the digital sub-trim channel are Up-Down (LT1-LT3, RT1-RT3) and Left-Right (LT2-LT4, RT2-RT4).
Page 48 DK32S Transmitter User Manual (V1.0.3) Steps to Reverse a Channel 1. When the DK32S transmitter is linked to a new model device, please confirm if all the servos of the new device have been mapped to the right channels; 2. Try to manipulate the transmitter’s joysticks, switches, buttons and dials to confirm if the direction of each channel is normal or reversed;...
Page 49: Sub-Trim
DK32S Transmitter User Manual (V1.0.3) 5.7 Sub-Trim The sub-trim function helps users set the middle position value of a channel’s and do trim adjustment to the aircraft’s flight attitude. Before doing sub-trim settings, please make sure that the target sub-trim channel is in its middle position.
Page 50: Trim Settings
DK32S Transmitter User Manual (V1.0.3) 3. Repeat step 2 if you are to adjust any other channels. Mark: In the sub-trim menu, tap on “Reset” to reset all channels. 5.8 Trim Settings The trim setting function helps users adjust digital sub-trim’s stepping value.
Page 51 DK32S Transmitter User Manual (V1.0.3) The DK32S transmitter’s trim setting value is default to be 5, the minimum limit of the trim setting value is 0, the maximum limit is 100; the minimum limit of the trim stepping value is 0, the maximum limit is 20.
Page 52: Trainer Mode
In the trainer mode, two transmitters are connected by a trainer cable. The users can decide which channel to use for training. In the trainer mode, the DK32S transmitter supports turning on/off the function through a physical switch or button. And users can switch the identity between trainer and student.
Page 53 DK32S Transmitter User Manual (V1.0.3) 4. The transmitter with the trainer mode turned on is the master transmitter, the other one is the slave transmitter; in the master transmitter the channel is default to be “Trainer”; 5. Each channel in the list has two status, trainer and student; if you change the status to “Student”...
Page 54: Fail Safe
DK32S Transmitter User Manual (V1.0.3) 7. When you have defined a switch / button, it will takeover the control of turning on / off trainer mode. 5.10 Fail Safe 2019 SIYI Tech All Right Reserved - 54 -...
Page 55 DK32S Transmitter User Manual (V1.0.3) Before linking the DK32S transmitter to the sky station, do not forget to do fail-safe settings and turn on the function. Thus if the transmitter lost link with the sky station, the fail-safe function will run automatically and immediately to protect the aircraft from a crash.
Page 56: Timer
For flight safety, the fail-safe settings must be done and the function must be turned on. 5.11 Timer In the DK32S transmitter main menu there are two timers. Timing Mode Up: Counts from 0, the timer alerts when it reaches the time.
Page 57: Voltage Alert
Stop: Define a switch / button for “Stop”. Reset: Define a switch / button for “Reset”. 5.12 Voltage Alert When the user’s aircraft power voltage is lower than the safe level, the DK32S transmitter will vibrate and send voice alert. Steps 1.
Page 58: Farming Voice
DK32S Transmitter User Manual (V1.0.3) voltage alert menu; 2. Tap on power voltage, then “+/-” to input the target voltage value according to your requirement; 3. Tap on “Return” to finish. 5.13 Farming Voice The Farming Voice is a professional function is for farming drones. The function is supported by up to 6 switches with 16 positions.
Page 59 DK32S Transmitter User Manual (V1.0.3) 2. In the farming voice menu, tap on “ON/OFF” to enable/disable the function; 3. Select a switch and a position; in the screen menu it shows the voice list; select a voice to define the switch;...
Page 60: Joystick Dead Zone
MnSpr (ManulSpr): Manual Spraying LtON (LightON): Navigation light on LtOFF (LightOFF): Navigation light off 5.14 Joystick Dead Zone By setting a certain dead zone range, the DK32S transmitter helps user filter out 2019 SIYI Tech All Right Reserved - 60 -...
Page 61: Multi-Drone Control
2. Tap on the range, then “+/-” to input a target range according to your requirement; 3. Tap on “Return” to finish. 5.15 Multi-Drone Control Through one DK32S transmitter users can control up to three drones at the same time. Switch Drone The function is to switch the control of linked drones, from drone No.1 to No.3.
Page 62 DK32S Transmitter User Manual (V1.0.3) When the “Syn-control” function is not activated, the DK32S transmitter controls one drone only. At this time, if you switch the control of a linked drone to another, for the uncontrolled drones, the channel value of CH1-4 stays in center (1500), the other channels stays not changing.
Page 63 DK32S Transmitter User Manual (V1.0.3) blinks red fast, go to the “MultiDroCtrl” menu, tap on “NoLink” of the drone No.1; When the indicator is on green, linking is finished. 5. Repeat Step 4 for drone No.2 and drone No.3 to finish all the linking process.
Page 64: System Settings
DK32S Transmitter User Manual (V1.0.3) 6 SYSTEM SETTINGS Functions General Stts (General Settings): Set transmitter’s basic functions Lock&Display (Screen Lock & Display): Turn on / off the display of the transmitter touch screen and adjust brightness H/W Settings (Hardware Settings): Change the hardware definition of several transmitter channels through software settings ExtPort Stts (Extending Ports Settings): Set the definition of the transmitter’s...
Page 65: General Settings
ESC Cali: Calibrate ESC through PWM ports on the sky station 6.1 General Settings General Settings Menu Introduction Link (Linking): Start linking the DK32S transmitter to the sky station. Lang. (Language): Switch the system language between Chinese/English. Thrttl (Throttle Type): Switch the throttle joystick type between “Self-centering” and “Thumb-slide”.
Page 66 DK32S Transmitter User Manual (V1.0.3) Vibrtn (Vibration): Turn on / off the vibration alert function. Voice (Voice Broadcast): Turn on / off the voice broadcast function. TxAlrt (Transmitter Low Battery Level Alert): Set a limit for the transmitter battery level lower than which transmitter will alert.
Page 67: Screen Lock & Display
6.2 Screen Lock & Display Users can turn on / off the screen lock, set the waiting time, adjust the screen brightness and the screen sleep waiting time of the DK32S transmitter. Screen Lock and Display Introduction Screen Lock: The touchscreen lock is disabled when the screen lock is enabled.
Page 68: H / W Settings
DK32S Transmitter User Manual (V1.0.3) 6.3 H / W Settings Through the H / W settings users can do advanced settings for the left dial (LD) to switch it between the Position Mode and the Speed Mode and the switch S1 / S4 / S5 / S6 to switch between Self-locking and Self-resetting.
Page 69: Extending Ports Settings
6.4 Extending Ports Settings The extending ports function help users extend transmitter function to external hardware devices and SDK. Currently the DK32S transmitter supports a Micro-USB port, a USB port and a 4-Pin Groove Port (DATA1). The Assigned Function to the Extending Ports Micro-USB: Charging, parameter adjustment, firmware upgrading and datalink output.
Page 70 5. Under “GPS” mode, the DATA1 port supports the GPS module. Agricultural drone pilots use the GPS module with the DK32S transmitter to mark flight points; 6. Under “SDK”, the DATA1 port supports output of the joystick channel value. Tap on “+ / -”...
Page 71: Joystick Calibrating
DK32S Transmitter User Manual (V1.0.3) 6.5 Joystick Calibrating The Joystick calibrating function help users calibrate the joysticks’ middle position. Regular calibration can maintain the control accuracy of the joysticks. No calibration is required if it was the thumb-slide joysticks. The self-centering joysticks require calibrating when they fail to reach the maximum / minimum positions or when they stay out of the middle position (channel value is not 0).
Page 72 DK32S Transmitter User Manual (V1.0.3) 4. Hold the joysticks and make them stay in the middle position (the joystick’s tick mark aligns with the transmitter’s tick mark), then tap on “Next”; 5. The transmitter starts detecting the middle position automatically, do not touch the joysticks while you are waiting;...
Page 73: Ld Calibrating
DK32S Transmitter User Manual (V1.0.3) 6.6 LD Calibrating Calibrating the left dial can maintain its output accuracy. The left dial requires calibration when it stays out of the middle position (channel value is not 0) or it fails to reach the maximum / minimum position.
Page 74: Export/Import Setting Data
5. Tap on “Finish” when it is over. 6.7 Export/Import Setting Data Through the export setting function users can export the data of system settings and model settings to the SD card so as to share the data to another DK32S transmitter. Steps to Export Setting Data 1.
Page 75 4. In the screen it pops up “Confirm to export” dialog, tap on “Confirm” to finish. Steps to Import Setting Data 1. Connect the DK32S transmitter to the computer via USB cable, and open the “SIYI Assistant” software; 2. Import the setting data saved in the SD card to the computer through a SD card reader, the files are in format “.CFG”.
Page 77: Rf Power
DK32S Transmitter User Manual (V1.0.3) 6.8.1 RF Power Power ratio function helps users adjust RF transmitting power output according to their requirement. Optional output power are 10dBm and 27 dBm. Steps 1. Power on the transmitter and sky station, make sure that they are linked with each other;...
Page 78: Esc Cali
DK32S Transmitter User Manual (V1.0.3) Steps to Choose the Antenna(s) 1. Power on the transmitter and the sky station, make sure that they are linked with each other; 2. In the system settings menu, tap on “Power Ratio”, in the screen it shows the power ratio menu;...
Page 79 DK32S Transmitter User Manual (V1.0.3) The DK32S transmitter simplified the ESC calibration a lot. Users just connect their ESC to the DK32S sky station’s PWM port 1 to 8, then follow the tips in the screen menu or the steps below to finish calibration.
Page 80: Sky Station Settings
DK32S Transmitter User Manual (V1.0.3) 7 Sky Station Settings Functions General Stts (General Settings): Set the basic functions of the sky station. Voltage Cali (Voltage Calibrating): Calibrate the voltage telemetry. PWM Settings: Change the channel definition under the PWM mode.
Page 81: General Settings
DK32S Transmitter User Manual (V1.0.3) 7.1 General Settings 7.1.1 Signal Mode Set signal mode for the three different output mode of the sky station, SBUS, PPM and PWM. Steps 1. In the general settings menu, select “Signal Mode” and tap on “SBUS / PPM / PWM”...
Page 82: Voltage Telemetry
7.1.3 Voltage Telemetry When the voltage telemetry function is turned on, in the PWR (power) column of the DK32S transmitter main menu, users can check the real-time display of the aircraft voltage telemetry. 7.1.4 Remote Control Relay The function helps users with long distance flight relay.
Page 83: Voltage Calibrating
DK32S Transmitter User Manual (V1.0.3) 3. Then link the transmitter 2 to the sky station; the transmitter is always the master transmitter even if you restart the sky station or transmitter. 7.2 Voltage Calibrating Before using the sky station, it is necessary to calibrate the telemetry voltage of both the sky station and the aircraft.
Page 84: Pwm Settings
7.3 PWM Settings In the DK32S transmitter and the PWM mode, users can redefine the output channel of the sky station (channel 1-9 in default), so that if the channel 9 is already working in SBUS or PPM mode, the PWM ports 1 to 8 can still output to the channels 1 to 16 of the transmitter.
Page 85 DK32S Transmitter User Manual (V1.0.3) station, the PWM port 2 of the transmitter is mapped to the PWM port 2 of the sky station…and so on; 3. In the “PWM Settings” menu, tap on a PWM port and select a channel through the virtual turntable in the screen according to your requirement;...
Page 86: Video Transmission / Datalink Settings
DK32S Transmitter User Manual (V1.0.3) 8 Video Transmission / Datalink Settings Functions Basic Stts (Basic Settings): Set basic functions of the datalink module. Advance Stts (Advanced Settings): Set the auto link function and the baud rate. Bluetooth: Choose the Bluetooth module for your flight controller.
Page 87: Basic Settings
USB output, Micro-USB output and Bluetooth output. Flight Controller: Select a flight controller. The DK32S transmitter supports all major flight controllers in market such as TOPXGUN (T1-A), WOOZOOM (THEONE-A), EFY (FINIX200M), BOYING (PALADIN), CHIAO (MATRIX), JIYI (K3-A), CFUAS (C1-A) and other flight controllers under open source Mavlink agreement such as PIX and APM.
Page 88: Advanced Settings
DK32S Transmitter User Manual (V1.0.3) CAUTION Before connecting the Micro-USB port of the transmitter to a smartphone or a tablet to communicate with the flight controller, you need to switch the port to Datalink. Steps In the “System Settings” menu, tap on “Port Settings”; tap on “Micro-USB” to switch the port to “Datalink”.
Page 89: Bluetooth
DK32S Transmitter User Manual (V1.0.3) 8.3 Bluetooth Please select the right external Bluetooth device according to your requiring flight controller. Standard: For any flight controllers except the Topxgun T1-A. Topxgun: For the Topxgun T1-A flight controller. 8.4 Link Status The link status function helps users check the detail signal and link status of the DK32S transmitter in real-time.
Page 90: Video Transmission Settings
DK32S Transmitter User Manual (V1.0.3) 8.5 Video Transmission Settings Users can check the serial number of the video transmission module and power on/off the function. Function Device: Displays the video transmission module’s serial number. Power: Power on/off the video transmission module.
Page 91: Firmware And Voice Upgrading
Steps to Upgrade Firmware and Voice Broadcast 1. Please visit SIYI Technology’s official website (http://www.siyi.biz); 2. In the product description page of the DK32S transmitter, tap on “Downloads”; 3. Select the “SIYI Assistant” software, driver, the latest firmware and voice broadcast files, tap on “Download”;...
Page 92: After-Sale Service
3. Find after-sale service center or technical support staff information and consult them with your product issue; 4. If the issue stays unsolved after confirming with SIYI Tech, then please refer to our after-service for filling in a “To-be-repair” form (personal repair form for individuals, distributor repair form for distributors);...
Page 93: After-Sale Policy
It is requested beyond seven (7) calendar days of receiving a product. A product sent to SIYI for Return & Refund Service does not include all original accessories, attachments or packaging, or any item is not in new or like-new condition, i.e.
Page 94: 15-Day Replacement
Damage is caused to the product by uncontrollable external factors, including fire, floods, high winds or lightning strikes. A product is not delivered to SIYI within seven (7) calendar days after Return & Refund Service confirmation is sent from SIYI.
Page 95 Legal proof-of-purchase, receipts, or invoices are not provided, or are reasonably believed to have been forged or tampered with. A product sent to SIYI for replacement does not include all original accessories, attachments and packaging, or contains items damaged by user error.
Page 96: 1-Year Warranty Repair
Charges may apply for services not covered by this Limited Warranty. Please contact SIYI for information specific to your location. Please note that the warranty service is only available in the respective SIYI service regions where you purchased your SIYI product.
Page 97 DK32S Transmitter User Manual (V1.0.3) Damage caused by operation in bad weather (i.e. strong winds, rain, sand/dust storms, etc.) Damage caused by operating the product in an environment with electromagnetic interference (i.e. in mining areas or close to radio transmission towers, high-voltage wires, substations, etc.)

SIYI DK32S User Manual

1 Read Tips

2 Product Introduction

3 Get Ready to Use Dk32S

4 Main Menu

5 Model Settings

6 System Settings

7 Sky Station Settings

8 Video Transmission / Datalink Settings

9 Firmware and Voice Upgrading

10 After-Sale Service

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SIYI DK32S

Summary of Contents for SIYI DK32S

Table of Contents