Beko WMB51022YU User Manual page 37

Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the
display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
4.10 Auxiliary function selection
Use the following auxiliary functions according to your
daily needs. Select the desired auxiliary functions before
starting the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button when
the machine is operating. For this, the machine must be in
a step before the auxiliary function you are going to select
or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to warn
the user.
C
Some functions cannot be selected together. If a second
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected
first will be canceled and the second auxiliary function
selection will remain active. For example, if you want to
select Quick Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will remain
active.
C
An auxiliary function that is not compatible with the
programme cannot be selected. (See "Programme and
consumption table")
C
Auxiliary Function buttons may vary according to the
model of the machine.
• Prelavaggio (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C
Prewash without detergent is recommended for tulle
and curtains.
• Rapido (Quick Wash)
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with
half of the maximum laundry specified in the programme
table.
37 / EN
2,5
45 0,90
2,5
45 0,42
Remaining Moisture Content
(%) **
≤ 1000 rpm
100/120 45
90/110 45
Delayed Start (In some models only)
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set Delayed Start!
There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin
speed and, if required, the auxiliary functions. Set the
desired time by pressing the Delayed Start button. When the
button is pressed once, 3 hours delayed start is selected.
When the same button is pressed again, 6 hours delay is
selected, and when it is pressed for the third time, 9 hours
delayed start is selected. If you press the Delayed Start
button once again, Delayed Start function will be canceled.
Press Start / Pause button. Previous delayed start time light
turns off and next delayed start time light turns on after
every 3 hours. At the end of the countdown, all delayed start
lights will turn off and the selected programme will start.
C
Additional laundry may be loaded during the delayed
start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is pressed,
the period will change in 3-hour increments and the light of
the selected delayed start time will turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Set the Delayed Start period to zero (all delayed start period
lights will turn off) or turn the Programme Selection knob
to any programme. Thus, Delayed Start function will be
canceled. The End/Cancel light flashes continuously. Then,
select the programme you want to run again. Press Start /
Pause button to start the programme.
Remaining Moisture Content
(%) **
> 1000 rpm
40
40
Washing Machine / User's Manual