MSI X370 GAMING M7 ACK Manual page 104

Using the utility to accomplish the procedures
Initialize Disk(s) - To initialize a new disk drive for data storage.
y
Create Array - Create arrays at different RAID levels (depending on the license level
y
for the system)
Delete Array(s) - Delete an array.
y
Swap Two Arrays - Change the array order, especially for the AMD-RAID bootable
y
array.
Manage Hot Sqare(s) - Allows selection of global and dedicated hot spares.
y
View Disk Details - View information about each disk.
y
View Array Details - View information about each array.
y
Rescan All Channels - Rescan all channels to detect new or removed disks and
y
arrays.
Controller Options - Change INT13 boot support, turn off Critical arrays or warning
y
for Offline arrays while booting, or change the number of disks that can be spun-up
when the system is powered-on.
Contiune to Boot - Exit the BIOS Configuration Utility and continue booting the
y
system.
Understanding the Colour Code
Colour codes indicate the type or status of information at the BIOS Configuration
Utility.
White text - Indicates an available option or informational text.
y
Black text, yellow highlighting - Indicates an option or device for which action might
y
be taken.
Yellow text - Indicates information about the yellow-highlighted option.
y
Green text - Indicates an item that has been selected.
y
Light blue text - Indicates that the item cannot be selected.
y
Magenta text - Indicates items that are related to spares or boot options.
y
Red text - Indicates a failed virtual or physical disk or a warning. For example,
y
informational text might be red if an option is not available.
104
RAID Configuration