Advertisement
TROUBLESHOOTING
When fault indicators show that the system is not operating properly, perform the following check.
Commonly Asked Questions & Topics
Carry out the operations below for commonly-occurring questions or faults.
Questions or Faults
Can the filters be washed?
The control panel does
not seem to work.
The equipment emits a lot
of noise.
The equipment operates
normally but the outgoing
air volume is significantly
reduced.
If the fault encountered is not listed above, please call the Customer Service Hotline.
The software in the air purifier is partly based on free and open source software. To see the full copyright
information and applicable license terms, please visit: www.electrolux.com
www.electrolux.com
Possible Diagnosis
NO
Power issue or the filter
compartment if unlocked.
The installation location is not
at even level or the filter is not
properly inserted.
The outlet might be blocked by
a foreign object or the filter has
not been replaced in a timely
manner.
Corrective Steps / Reasoning
Replace the compound filter instead
of wash, the pre-filter can be wiped.
Check if the equipment is powered
on and confirm whether the filter
compartment door is locked.
Install the equipment on a level
surface and re-confirm filter
installation position and order.
Please re-adjust the equipment
installation position to ensure enough
space is reserved, and confirm that
filter have been replaced according to
filter replacement indicator status.
7
Advertisement
