Charging Modes - NOCO Genius GENIUS User Manual

Contacting NOCO
Phone:
Email:
Mailing Address:
About G1100.
some of the most innovative and advanced technology on
the market, making each charge simple and easy. It is quite
possibly the safest and most efficient charger you will ever
use. The G1100 is designed for charging all types of 6V &
12V lead-acid and 12V lithium-ion batteries, including Wet
(Flooded), Gel, MF (Maintenance-Free), CA (Calcium), EFB
(Enhanced Flooded Battery), AGM (Absorption Glass Mat),
and LIB (Lithium Ion) batteries. It is suitable for charging
battery capacities from 2 to 40 Amp-Hours and maintaining
all battery sizes.
Mounting.
mounting. Mount the charger in a desired location with
#6 self-drill screws. Make sure there are no obstructions
behind the mounting surface. It is important to keep in
mind the distance to the battery. The DC cable length from
the charger, with either the battery clamp or eyelet terminal
connectors, is approximately 75-inches (1,900mm). Allow
for 12-inches (304mm) of slack between connections.

Charging Modes.

Standby, 12V NORM, 12V COLD/AGM, 6V NORM, and
12V LITHIUM. Some charge modes must be pressed
and held for three (3) seconds to enter the mode. These
"Press and Hold" modes are advanced charging modes
that require your full attention before selecting. "Press
and Hold" are indicated on the charger by a red line. It is
important to understand the differences and purpose of
each charge mode. Do not operate the charger until you
confirm the appropriate charge mode for your battery.
Below is a brief description:
.
1.800.456.6626
support@no.co
30339 Diamond Parkway, #102
Glenwillow, OH 44139
United States of America
The NOCO Genius
The G1100 has two (2) external holes for
The G1100 has five (5) modes:
G1100 represents
®