LG 32MN58HM Owner's Manual page 10

Adjusting the angle of the monitor to
suit view
• Image shown may differ from your monitor.
Tilt from -5° to 10° degrees up or down to adjust the angle of the
monitor to suit your view.
-5°
10°
Front
CAUTION
• When you adjust the angle, do not hold the buttom of the monitor
frame as shown on the following illustration, as may injure your
fingers.
Installing the wall mounting bracket
support
As shown below, detach the stand bracket before installing the wall
mounting bracket support.
1 Lay the monitor down on a flat surface with the panel facing
down. Before that, lay down a soft cloth or a cushion first so as to
prevent damage to the panel.
Stand
bracket
8
2 As shown in the figure, use a flat tool to remove the cover.
Rear
3 Remove the screws and detach the stand bracket.
Back
Cover
Example: Slot (-) type screwdriver