Settings - LG 32MN58HM Owner's Manual

Settings

Adjusting aspect ratio
Resize an image to view at its optimal size by pressing Q.MENU or
accessing Aspect Ratio in the PICTURE menu.
NOTE
• The available ratio varies depending on the input source.
• If you select Just Scan, you may see image noises at the edge of
the original signal.
• If you enlarge or reduce an image, the image may be distorted.
Selecting an input source
1 Press INPUT to access the input sources. The connected device
displays on each input source.
2 Press the Navigation buttons or INPUT button to scroll to one
of the input sources and press OK
Entertainment
(Depending on model)
Setting USB AutoRun
SETTINGS ➾ OPTION ➾ USB AutoRun
Play photos or videos of USB automatically when monitor is turned
on or USB is connected.
• Off : Turn off the USB AutoRun.
• Movie : Play videos of USB automatically.
• Photo : Play photos of USB automatically.
• Only plays the files in the top level folder of the USB device in
sequence.
• While playing, press the BACK or EXIT button on the remote
control to end this function.
• If the files are invalid or corrupted, the following message appears
before returning to the previous input status: "This file is invalid."
• When the USB device is reconnected after being disconnected
during video playback, Continue watching starts automatically
and resumes the video from the last viewed scene (only applies to
the first video).
Connecting USB storage devices
CAUTION
• Do not turn the monitor off or remove a USB storage device while
the USB storage device is connected to the monitor, as this could
result in loss of files or damage to the USB storage device.
• Back up your files saved on a USB storage device frequently, as you
may lose or damage the files and this may be not covered by the
manufacturer's warranty.
12
.
Connect USB storage devices (USB memory) to the monitor and use
multimedia features. Connect a USB flash memory or USB memory
card reader to the monitor. To disconnect a USB storage device,
make sure to end the connection properly to prevent damages to the
monitor or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to Eject and press
OK .
3 Disconnect the USB storage device only when the message says
that it is safe to remove.
Tips for using USB storage devices
• Only a USB storage device is recognizable.
• If the USB storage device is connected through a USB hub, the
device is not recognizable.
• A USB storage device using an automatic recognition programme
may not be recognized.
• A USB storage device which uses its own driver may not be
recognized.
• The recognition speed of a USB storage device may depend on
each device.
• Please do not turn off the monitor or unplug the USB device when
the connected USB storage device is working. When such device
is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
• Please do not connect the USB storage device which was
artificially manoeuvred on the PC. The device may cause the
product to malfunction or fail to be played. Never forget to use
only a USB storage device which has normal music files, image
files or movie files.
• Please use only a USB storage device which was formatted as a
FAT16, FAT32, NTFS file system.
• Please connect a USB storage device with the cable offered by the
device maker.
• Some USB storage devices may not be supported or operated
smoothly.
• Be sure to back up important files since data stored in a USB
memory device may be damaged. We will not be responsible for
any data loss.
• If a USB memory device is connected to a USB multi-card reader,
its volume data may not be detected.
• If the USB memory device does not work properly, disconnect and
reconnect it.
• How fast a USB memory device is detected differs from device to
device.
• The recommended capacity is 1 TB or less for a USB external hard
disk and 32 GB or less for USB memory.
• Any device with more than the recommended capacity may not
work properly.
• USB storage devices below USB 2.0 are supported as well. But they
may not work properly in the movie list.
• Maximum of 999 folders or files can be recognized under one
folder.
• If there are a lot of folders or files all within one folder, the device
may not be able to access these properly.
• For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 0.5 A.